An offshore structure is operated in an ocean wave environment that is stochastic in nature. Essential knowledge of ocean wave mechanics is practically important when it comes to the reliability of the structure. This paper summarised the numerical formulation involved in representing the ocean wave which will provide interaction effect in the design load of offshore structural response. Mechanism of wave load involved the formulation of wave spectra, ocean wave theory, water particles kinematics above sea water level, and the evaluation of wave force. Several formulations introduced by previous researchers for each process of wave load mechanism are discussed. At the end of this study, a good understanding of the estimated wave loads-induced responses will be discovered in terms of the selected ocean wave modelling. In application perspective, the calculated offshore structural responses would be utilised as the design load (structural responses) in structural reliability analysis of offshore platforms.
The reliability of offshore structure is dominantly affected by the wind-generated random waves load. Hence, an appropriate technique is required in predicting the extreme response due to the dominant load. Monte Carlo (MC) time simulation is said to be the most accurate technique. However, such analysis leads to a large number of response records which is computationally demanding. Current finding shows that a modified finite-memory nonlinear system offered more efficient technique. Still, the accuracy is getting severe once negative current is considered. Hence, improved version of MFMNS technique is required by modelling the residue between the extreme values from MC and the approximate MFMNS techniques; known as the eMFMNS technique. In advanced, a comprehensive study on eMFMNS technique will be carried out involving a wide range of environmental conditions. From the investigation, it is proven that eMFMNS technique improved the accuracy in predicting extreme values compare to MFMNS technique.
Offshore structures are exposed to random wave loading in the ocean environment. The response is commonly non-Gaussian due to the nonlinearity of the drag component of Morison's wave loading and also the load intermittency on members in the splash zone. The previous study shows that the developed finite-memory nonlinear system (FMNS) model can efficiently simulate the response of an offshore structure to random Morison wave loading. However, the FMNS models minimise the computational effort, and the estimates are not particularly good for lower significant wave height value. To overcome this deficiency, a modified version of FMNS models (MFMNS) is used to compute the extreme response values which increase the accuracy but is computationally less efficient than the current FMNS models. In this study, the probability distributions of extreme responses from both models are compared with corresponding distributions from the conventional time simulation technique to establish their level of accuracy.
Accurate estimation of the 100-year responses (derived from the long-term distribution of extreme responses) is required for the safe and economical design of offshore structures. However, due to nonlinearity of the drag component of Morison’s wave loading and also due to intermittency of wave loading on members in the splash zone, the response is often non-Gaussian; therefore, simple techniques for derivation of the probability distribution of extreme responses are not available. To this end, conventional Monte Carlo time simulation technique could be used for predicting the long-term probability distribution of the extreme responses. However, this technique suffers from excessive sampling variability and hence a large number of simulated response records are required to reduce the sampling variability to acceptable levels. This paper takes advantage of the correlation between extreme responses and their corresponding extreme surface elevations to derive the values of the 100-year responses without the need for extensive simulations. It is demonstrated that the technique could be used for both quasi-static and dynamic responses.
The most reliable technique for predicting the statistical properties of the response of an offshore structure to random wave loading is the conventional time simulation method (CTS). However, this study is concerned to reduce the computational demand of this method due to long simulation needed for stable results. To this end, a more efficient version of the time simulation technique (ETS) has been introduced which divides the simulated response extreme values into several groups based on the magnitude of the extreme values of their associated surface elevation or linear response records. The method has proved to be very efficient for both low and high-intensity sea states. In this study, the 100-year extreme responses from ETS and CTS methods have been compared to examine the accuracy of the ETS technique. Overall, the ETS technique was found to be many times more efficient than the conventional method.