Robin Kumar

Robin Kumar

Auto-generated profile, based on publicly available information

Robin Kumar


Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 November 2024 in Physics of Fluids
Verified
Journal Article
Closed access
PDF file
RKRobin Kumar
Robin Kumar
SMSudipto Mukhopadhyay
Sudipto Mukhopadhyay
Secondary atomization is extensively studied by investigating a droplet subjected to a steady air/gas stream. However, droplets are often subjected to unsteady or pulsating flows, such as in aero-engines or rockets, because of thermo-acoustic instabilities in the combustion chambers. The investigation focuses on the droplet dynamics and breakup in a pulsating flow for a range of density ratios (ρr), 1000 to 10, under sinusoidal airflow of different amplitudes and frequencies as compared to the dynamics in a steady flow. The volume of fluid multiphase model tracks the liquid–gas interface, and the governing equations are solved using the finite volume method. The two-dimensional axisymmetric pulsating simulations demonstrate accuracy comparable to the corresponding three-dimensional simulations at a much lower computational cost and are used for parametric studies. The droplets under the pulsating flow show a wavy surface, and larger vortex structures are observed during the deceleration period. At a high-density ratio (1000), pulsating flow enhances droplet deformation for a faster breakup, with the flow amplitude having more impact than its frequency. For a medium-density ratio (100), where breakup occurs under steady flow, droplet breakup is inhibited in the pulsating flow at low amplitude and high frequency. In the case of a low-density ratio (10), there is no breakup under steady flow, but pulsating flow promotes breakup, except at low amplitude and high frequency. The droplet breakup is always achieved for the highest amplitude, while lower frequencies push the liquid mass from the center of the droplet to the rim.

1 February 2025 in Physics of Fluids
Verified
Journal Article
Closed access
RKRobin Kumar
Robin Kumar
SMSudipto Mukhopadhyay
Sudipto Mukhopadhyay
The breakup of non-Newtonian droplets under steady flow has been investigated extensively. However, non-Newtonian droplets under unsteady or pulsating flows have not been studied. This is relevant for kerosene gel droplets, which are shear thinning in nature and may be subjected to thermo-acoustic instabilities in the rocket combustion chamber. The investigation focuses on the shear-thinning droplet dynamics and breakup subjected to pulsating (sinusoidal) airflow of different amplitudes and frequencies. The volume of fluid multiphase model tracks the liquid–gas interface, and the governing equations are solved using the finite volume method. The shear-thinning behavior is modeled using a power law. Simulations are carried out for a Weber number (We=13) for which the droplet with power law index, n=0.67, does not show a breakup in a steady flow. However, a breakup is exhibited when subjected to a pulsating flow for the same We based on the mean gas speed except for the lowest amplitude (A=0.25) and frequency (f=500 Hz) investigated. Parametric investigations for different n show that the droplet breakup time significantly increases for n>0.8 for the pulsating flow of different amplitudes and frequencies. It is also observed that the change in frequency or amplitude changes the temporal evolution of the droplet viscosity for a constant n. Also, for the same A and f, the droplet with the lower value of n (0.8).