The K3LuSi2O7 phosphor doping Eu2+ rare-earth ions (KLS:Eu) was reported to possess broad emission band from near-ultraviolet to nearinfrared. Additionally, this phosphor showed a wide absorption band of 250-600 nm, allowing it to be excited by blue-light chip of 460 nm, making it one of the suitable phosphor materials for a light emitting diode (LED). Besides, the scattering particle material CaCO3 is incorporated into the yellow phosphor layer to serve the scattering-enhancement purpose. The combination of both materials aims at accomplishing improvements in performance of commercial LED package. The concentration of KLS:Eu is constant while that of CaCO3 is modified. As a result, the scattering factor is regulated and become the key factor influencing the optical outputs of the simulated LED. The increasing CaCO3 concentration enhances the phosphor scattering efficiency of light, helping to improve the lumen output and color-temperature consistency of the LED. However, the color rendering performance declines as a function of the CaCO3 growing amount, despite the presence of a KLS:Eu phosphor layer. Further works should be done to optimize the application of KLS:Eu in cooperation with scattering particles for a higher-quality LED device.
1 October 2022 in Bulletin of Electrical Engineering and Informatics
The study uses the green phosphor of Ca2SiO4:Eu2+ to achieve the color constancy for the dual-film remote phosphor white-LED model at low as well as big CCTs. The utilized green phosphor Ca2SiO4:Eu2+ was prepared using the water-soluble-silicon liquid phase precursor method with the doped Eu2+ ion concentration of 3 mol%. The Ca2SiO4:Eu2+ phosphor emits strong green light with emission intensity focused at 502 nm wavelength, and a wide stimulation band of colors of 225 nm – 450 nm. After applying the Ca2SiO4:Eu2+ green phosphor and modifying its concentration, the modified color and luminous performances can be observed. The better color uniformity and higher luminescence efficiency can be obtained by increasing the percentage of Ca2SiO4:Eu2+ in the phosphor configuration. Meanwhile, the color rendering metrics tend to reduce slightly when the concentration of Ca2SiO4:Eu2+ is over 10% wt.