9 January 2018 in Journal of Materials Science
9 January 2017 in International Journal of Crashworthiness
In order to improve crashworthiness, the optimum energy-absorption design of locomotives was performed in MADYMO multibody dynamics software, and a three-dimensional computational model for locomotive vehicles was built. The results of calculations using the model were then fitted by multiple linear-regression functions, and a scaled equivalent model test was carried out to validate the fitting formula results. The results showed how to influence the energy absorption of a locomotive by studying the mass and velocity of the locomotive, as well as the plastic deformation platform force of the middle car's crushing tube. The fitting formula related to the plastic deformation platform force of the crushing of the middle car's tube and the kinetic energy of the locomotive was also obtained. The fitting accuracy of the model was 99.98%, and the error between the calculation results from the fitting formula and the scaled equivalent model test results was less than 5%. These results reveal the mode of energy dissipation, and they can be applied to the preliminary conceptual design of train. The dynamic tests of prototype are essential before serial production.
15 September 2022 in International Journal of Crashworthiness
This paper studied the energy absorption performance of conical tubes subjected to dynamic axial loading based on numerical finite element calculations. The influence of geometric parameters and material properties on the collapse behavior and energy absorption was discussed. The results showed that the two materials considered in this study have little effect on deformation mode of conical tubes, while the taper angle has a significant effect on deformation mode of conical tubes, and a classification chart of deformation modes for conical tubes was proposed. It was found that the conical tubes with TM mode have the best energy absorption characteristics, and the aluminum alloy conical tubes is more effective than similar tubes made from mild steel. Based on dimensional analysis, a model was proposed to predict the dynamic response of conical tubes under axial loading, including deformation displacement, energy absorption, specific energy absorption and mean crushing force. The results predicted by the proposed model were found to match well with the finite element analysis results. Furthermore, the equivalent substitution method between the aluminum alloy and mild steel conical tubes was studied, which concluded that the energy absorption equivalence method is better for lightweight design of energy-absorbing conical tubes.
30 January 2024 in International Journal of Crashworthiness
21 July 2023 in International Journal of Crashworthiness
16 December 2022 in Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit
Predicting the dynamic behavior of train collisions using similitude theory is a valuable design tool. However, several limitations and difficulties persist when designing a similar train model. This study proposes a mechanical equivalence similitude method when a train crashes into a rigid obstacle longitudinally, which can be used to establish similitude laws and predict the dynamic responses of a full-scale high-speed train middle vehicle. This method includes impact force equivalence (IFE) and finite-element stiffness equivalence (FESE). The aim is to overcome the insufficient accuracy of establishing a similar train model using traditional similitude methods. First, the similitude laws of the end energy absorber and the vehicle body were deduced. Subsequently, the 1/8th equivalent similar middle vehicle model of the high-speed train was established. The IFE method was employed to design a 1/8th equivalent similar model of the end energy absorber. Based on the FESE method, a 1/8th equivalent similar model of the middle vehicle body was built. Finally, the accuracy and effectiveness of a similar train model were validated through numerical simulations and tests. Comparing the results of the prototype, the errors of the dynamic responses were less than 4%, indicating that the mechanical response equivalence similitude method is effective for constructing a similar train model.