17 January 2018 in Optics Express
We demonstrated a method to obtain super flexible LEDs, based on high quality pyramid arrays grown directly on sapphire substrates. Laser lift-off (LLO) and dual transfer processes were applied to transfer pyramid arrays face up onto the flexible substrates, which is more efficient than back light emission. Ag grid and Ag nanowires were employed as the electrical connection. No significant performance reduction appeared until the device reached a curvature radius of 0.5 mm. The performance reduction results from cracks appearing at the junction of the Ag grid, which can be improved by replacing the Ag grid with a strip electrode.
24 March 2023 in Journal of Applied Physics
Recent advances in the development of surface plasmons (SPs) enhanced LED have provided a great opportunity to enhance either the internal quantum efficiency (IQE) or the spontaneous emission rate (SE) by employing specific metal structures. However, it is still challenging to simultaneously achieve high IQE and Purcell factor (Fp), which demonstrates the SE enhancement, without sacrificing the electrical performance of LEDs. Herein, we designed and investigated a conic metal structure applied to LEDs by comprehensively considering the electrical, optical, and data transmission performance of devices. Conic structures with various heights were implemented to investigate the variation trends of IQE and Fp with the structure design, accompanied by the planar structures as references. A more than five times increase in IQE and almost five times increase in Fp were demonstrated experimentally even with a coupling distance of 100 nm, by employing this conic structure. The theoretical analysis was verified by the experimental results and revealed the mechanism of high Fp and IQE toward high SP–photon coupling efficiency and initial IQE. This study provides a universal strategy to enhance the performance of luminous efficiency and modulation speed of LEDs without sacrificing electrical properties, making them viable for the integration of lighting, display, and communication.
18 August 2025 in Applied Physics Letters
Linearly polarized LEDs (LP-LEDs) hold significant potential for a wide range of advanced optoelectronic applications. Recent approaches employing single metallic gratings, with the double function of surface plasmon–quantum well (SP–QW) coupling and polarization selection, demonstrate potential for high-performance LP-LEDs. However, challenges persist in simultaneously optimizing luminous efficiency, electrical performance, and polarization degree. Therefore, we present a GaN-based blue light-emitting diode integrated with two collaborative metasurfaces, an Ag nanocone metasurface for efficiency enhancement and an Al nanograting for polarization-selective emission. Dual-structure design with collaborative functionalities resolves the trade-off between polarization selection and SP–QW coupling, while the introduction of Ag metasurface addresses the conflict between low luminous efficiency and poor electrical performance. Thereby, the fabricated LP-LED achieves highly efficient polarized emission, with an average polarization extinction ratio (ER) of 23.2 dB within ±60°, along with a 2.5-fold enhancement in efficiency and a 1.24-fold improvement in ER relative to the conventional Ag reflector design. This integrated design offers a promising route for the realization of high-efficiency, polarization-controlled optoelectronic devices, with broad implications for secure communications, advanced display technologies, optical interconnects, and biomedical diagnostics.