Hydrates, Flow Assurance and Phase Equilibria Group, Institute of Petroleum Engineering, Heriot-Watt University, Edinburgh EH14 4AS, Scotland, United Kingdom
Auto-generated profile, based on publicly available information
Bahman Tohidi
Hydrates, Flow Assurance and Phase Equilibria Group, Institute of Petroleum Engineering, Heriot-Watt University, Edinburgh EH14 4AS, Scotland, United Kingdom
This review includes the current state of the art understanding and advances in technical developments about various fields of gas hydrates, which are combined with expert perspectives and analyses.
25 January 2000 in Annals of the New York Academy of Sciences
Visual observation of gas hydrates at the microscopic scale in synthetic porous media provides unequivocal visual evidence that clathrates can form in systems without the presence of a free-gas phase. Hydrates were formed from a soluble liquid hydrate former (tetrahydrofuran, C4H8O), from free gas (CH4), and from dissolved gas (CO2). Clathrates were found to form within the center of pore spaces, rather than on grain surfaces. Cementation of grains only occurred in regions of a small grain size, or where a large proportion of pore space was filled with hydrate. However, even at high clathrate saturations, a thin film of free water persisted on grain surfaces. The results have important implications for the potential cementing effect of hydrates on sediments, and thus for sediment permeability, slope stability, and seismic interpretation of hydrate-bearing sediments.
1 May 2005 in Oil & Gas Science and Technology – Revue d’IFP Energies nouvelles
CO2 injection into tertiary oil reservoirs has been widely accepted as an effective technique for enhanced oil recovery (EOR), and has been used by the oil industry for over 40 years. Concerns over greenhouse gas emissions are leading to the investigation and realisation of its potential as a carbon storage method in recent years. With the right reservoir conditions, injection of CO2 into oil reservoirs can result in incremental oil recovery and permanent storage of CO2 in geological formation. The majority of previous and current CO2 EOR projects use low cost CO2 sources and have good economic returns in terms of high gas utilisation efficiencies (167-227 sm3 CO2/STB oil). The potential of CO2 storage combining EOR is high; approximately 60% injected CO2 can be retained in the reservoir at the CO2 breakthrough if reinjection is not considered. It has been accepted that there is little major technical challenges for CO2 EOR projects, but there are economic constrictions if high cost anthropogenic CO2 (such as from power plant) is used for EOR and storage operations. In this chapter, a general review is given on the CO2 EOR and storage potentials, field screening and economic analysis. A case study for CO2 EOR application in a North Sea field is also presented. L'injection de CO2 dans des réservoirs pétroliers est une méthode efficace de récupération assistée du pétrole (EOR) et est utilisée par l'industrie pétrolière depuis une quarantaine d'années. La prise en compte des émissions de gaz à effet de serre dans l'atmosphère a mené à étudier ces dernières années le potentiel de cette méthode pour stocker durablement le CO2. Si les conditions de réservoirs sont adéquates, elle peut permettre à la fois d'augmenter notablement la récupération d'huile et de stocker définitivement du CO2 dans les formations géologiques. La plupart des projets passés et actuels d'EOR utilisent du CO2 peu coûteux et ont un résultat économique appréciable (167-227 sm3 CO2/STB pétrole). Le potentiel de stockage du CO2 associé à l'EOR est important, à peu près 60 % du CO2 injecté est retenu dans le réservoir, en ne prenant pas en compte la réinjection. Il est admis qu'il y a peu de défis technologiques majeurs à relever, cependant les contraintes économiques doivent être prises en compte pour les cas de CO2 cher (comme par exemple celui provenant de la production d'électricité). Dans cet article, un panorama des potentiels de stockage de CO2 associés à l'EOR est donné. Une étude de cas en mer du Nord est présentée.
20 October 2007 in Journal of Chemical & Engineering Data