19 April 2022 in IEEE Transactions on Industry Applications
A very simple and therefore wide-spread way to control motor speed and torque is to regulate the stator voltage by pulsewidth modulation (PWM). Depending on the modulation type, number of inverter levels, and modulation index of the PWM, various spectral components occur in the supply signal and inject ripple current in the motor phases. This current distortion can cause significant additional losses in the stator and rotor core, permanent magnets, and windings of an electric machine. Therefore, it is important to consider these losses in an early design stage. In this work, an efficient calculation method for harmonics of multilevel PWM signals and generated phase currents with different modulation types is presented. The PWM losses are calculated via 2-D finite element method analyses. The calculation and simulation workflow is realized within the software tool SyMSpace and applied to a three-phase permanent magnetic synchronous machine (PMSM). Loss measurements at different PWM frequencies and load points are conducted on a 3-phase PMSM. Since simulation and measurement results show good accordance, the proposed methods could be validated.
28 July 2015 in Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering
Optimizing mechatronic components is of increasing importance, e.g. for minimizing energy consumption and the use of rare materials. MagOpt is a modular software tool for the simulation and optimization of mechatronic components. Parametric design optimization can be carried out with various different optimization strategies like gradient-based methods or multi-objective evolutionary or genetic algorithms. MagOpt features a flexible structure for the storage of complex data and an open and modular interface to existing third-party programs. One such third-party program which can be used by MagOpt for the optimization of mechanic components is the multi-body software HOTINT. This article describes MagOpt and how it was coupled with HOTINT to optimize a rotor geometry.
28 March 2025 in e+i Elektrotechnik und Informationstechnik