The question of whether structural segment boundaries along multisegment normal faults such as the Wasatch fault zone (WFZ) act as persistent barriers to rupture is critical to seismic hazard analyses. We synthesized late Holocene paleoseismic data from 20 trench sites along the central WFZ to evaluate earthquake rupture length and fault segmentation. For the youngest (<3 ka) and best‐constrained earthquakes, differences in earthquake timing across prominent primary segment boundaries, especially for the most recent earthquakes on the north‐central WFZ, are consistent with segment‐controlled ruptures. However, broadly constrained earthquake times, dissimilar event times along the segments, the presence of smaller‐scale (subsegment) boundaries, and areas of complex faulting permit partial‐segment and multisegment (e.g., spillover) ruptures that are shorter (~20–40 km) or longer (~60–100 km) than the primary segment lengths (35–59 km). We report a segmented WFZ model that includes 24 earthquakes since ~7 ka and yields mean estimates of recurrence (1.1–1.3 kyr) and vertical slip rate (1.3–2.0 mm/yr) for the segments. However, additional rupture scenarios that include segment boundary spatial uncertainties, floating earthquakes, and multisegment ruptures are necessary to fully address epistemic uncertainties in rupture length. We compare the central WFZ to paleoseismic and historical surface ruptures in the Basin and Range Province and central Italian Apennines and conclude that displacement profiles have limited value for assessing the persistence of segment boundaries but can aid in interpreting prehistoric spillover ruptures. Our comparison also suggests that the probabilities of shorter and longer ruptures on the WFZ need to be investigated.

The 6 February 2023 $Mw$ 7.8 Pazarcık and subsequent $Mw$ 7.5 Elbistan earthquakes generated strong ground shaking that resulted in catastrophic human and economic loss across south‐central Türkiye and northwest Syria. The rapid characterization of the earthquakes, including their location, size, fault geometries, and slip kinematics, is critical to estimate the impact of significant seismic events. The U.S. Geological Survey National Earthquake Information Center (NEIC) provides real‐time monitoring of earthquakes globally, including rapid source characterization and impact estimates. Here, we describe the seismic characterization products generated and made available by the NEIC over the two weeks following the start of the earthquake sequence in southeast Türkiye, their evolution, and how they inform our understanding of regional seismotectonics and hazards. The kinematics of rupture for the two earthquakes was complex, involving multiple fault segments. Therefore, incorporating observations from rupture mapping was critical for characterizing these events. Dense local datasets facilitated robust source characterization and impact assessment once these observations were obtained and converted to NEIC product input formats. We discuss how we may improve the timeliness of NEIC products for rapid assessment of future seismic hazards, particularly in the case of complex ruptures.

Surface rupture in the 2019 Ridgecrest, California, earthquake sequence occurred along two orthogonal cross faults and includes dominantly left‐lateral and northeast‐striking rupture in the $Mw$ 6.4 foreshock and dominantly right‐lateral and northwest‐striking rupture in the $Mw$ 7.1 mainshock. We present $>650$ field‐based, surface‐displacement observations for these ruptures and synthesize our results into cumulative along‐strike displacement distributions. Using these data, we calculate displacement gradients and compare our results with historical strike‐slip ruptures in the eastern California shear zone. For the $Mw$ 6.4 rupture, we report 96 displacements measured along 18 km of northeast‐striking rupture. Cumulative displacement curves for the rupture yield a mean left‐lateral displacement of 0.3–0.5 m and maximum of 0.7–1.6 m. Net mean vertical displacement based on the difference of down‐to‐the‐west (DTW) and down‐to‐the‐east (DTE) displacement curves is close to zero (0.02 m DTW). The $Mw$ 6.4 displacement distribution shows that the majority of displacement occurred southwest of the intersection with the $Mw$ 7.1 rupture. The $Mw$ 7.1 rupture is northwest‐striking and 50 km long based on 576 field measurements. Displacement curves indicate a mean right‐lateral displacement of 1.2–1.7 m and a maximum of 4.3–7.0 m. Net vertical displacement in the rupture averages 0.3 m DTW. The $Mw$ 7.1 displacement distributions demonstrate that maximum displacement occurred along a 12‐km‐long portion of the fault near the $Mw$ 7.1 epicenter, releasing 66% of the geologically based seismic moment along 24% of the total rupture length. Using our displacement distributions, we calculate kilometer‐scale displacement gradients for the $Mw$ 7.1 rupture. The steepest gradients (⁠ $∼1–3m/km$⁠) flank the 12‐km‐long region of maximum displacement. In contrast, gradients for the 1992 $Mw$ 7.3 Landers and 1999 $Mw$ 7.1 Hector Mine earthquakes are $<0.6m/km$⁠. Our displacement distributions are important for understanding the influence of cross‐fault rupture on $Mw$ 6.4 and 7.1 rupture length and displacement and will facilitate comparisons with distributions generated remotely and at broader scales.

The 6 February 2023 Kahramanmaraş, Turkey (Türkiye), earthquake sequence produced > 500 km of surface rupture primarily on the left‐lateral East Anatolian (~345 km) and Çardak (~175 km) faults. Constraining the length and magnitude of surface displacement on the causative faults is critical for loss estimates, recovery efforts, rapid identification of impacted infrastructure, and fault displacement hazard analysis. To support these efforts, we rapidly mapped the surface rupture from satellite data with support from remote sensing and field teams, and released the results to the public in near‐real time. Detailed surface rupture mapping commenced on 7 February and continued as high‐resolution (< 1.0 m/pixel) optical images from WorldView satellites (2023 Maxar) became available. We interpreted the initial simplified rupture trace from subpixel offset fields derived from Advanced Land Observation Satellite2 and Sentinel‐1A synthetic aperture radar image pairs available on 8 and 10 February, respectively. The mapping was released publicly on 10 February, with frequent updates, and published in final form four months postearthquake (Reitman, Briggs, et al., 2023). This publicly available, rapid mapping helped guide fieldwork and constrained U.S. Geological Survey finite‐fault and loss estimate models, as well as stress change estimates and dynamic rupture models.

We present the 2023 U.S. Geological Survey time-independent earthquake rupture forecast for the conterminous United States, which gives authoritative estimates of the magnitude, location, and time-averaged frequency of potentially damaging earthquakes throughout the region. In addition to updating virtually all model components, a major focus has been to provide a better representation of epistemic uncertainties. For example, we have improved the representation of multifault ruptures, both in terms of allowing more and less fault connectivity than in the previous models, and in sweeping over a broader range of viable models. An unprecedented level of diagnostic information has been provided for assessing the model, and the development was overseen by a 19-member participatory review panel. Although we believe the new model embodies significant improvements and represents the best available science, we also discuss potential model limitations, including the applicability of logic tree branch weights with respect different types of hazard and risk metrics. Future improvements are also discussed, with deformation model enhancements being particularly worthy of pursuit, as well as better representation of sampling errors in the gridded seismicity components. We also plan to add time-dependent components, and assess implications with a wider range of hazard and risk metrics.

The 1983 Mw 6.9 Borah Peak earthquake generated ∼36 km of surface rupture along the Thousand Springs and Warm Springs sections of the Lost River fault zone (LRFZ, Idaho, USA). Although the rupture is a well-studied example of multisegment surface faulting, ambiguity remains regarding the degree to which a bedrock ridge and branch fault at the Willow Creek Hills influenced rupture progress. To explore the 1983 rupture in the context of the structural complexity, we reconstruct the spatial distribution of surface displacements for the northern 16 km of the 1983 rupture and prehistoric ruptures in the same reach of the LRFZ using 252 vertical-separation measurements made from high-resolution (5–10-cm-pixel) digital surface models. Our results suggest the 1983 Warm Springs rupture had an average vertical displacement of ∼0.3–0.4 m and released ∼6% of the seismic moment estimated for the Borah Peak earthquake and <12% of the moment accumulated on the Warm Springs section since its last prehistoric earthquake. The 1983 Warm Springs rupture is best described as the moderate-displacement continuation of primary rupture from the Thousand Springs section into and through a zone of structural complexity. Historical and prehistoric displacements show that the Willow Creek Hills have impeded some, but not all ruptures. We speculate that rupture termination or penetration is controlled by the history of LRFZ moment release, displacement, and rupture direction. Our results inform the interpretation of paleoseismic data from near zones of normal-fault structural complexity and demonstrate that these zones may modulate rather than impede rupture displacement.