13 August 2025 in Scientific Reports
This study explores the production process and mechanical properties of biocomposites reinforced with pineapple leaf fibres. The biocomposite fabrication involves the use of various techniques, including compression moulding, to integrate the natural fibres into a polyester matrix. The mechanical performance of the resulting composites is evaluated through a comprehensive set of tests, including tensile strength measurements and Energy Dispersive X-Ray Spectroscopy (EDX). Key factors influencing mechanical behaviour, such as fibre content, orientation, and production variables, are systematically examined. Additionally, the chemical composition of the composites is assessed to understand its role in their performance. The findings provide valuable insights into the potential applications of pineapple leaf fibre-based biocomposites in industries requiring lightweight, sustainable materials with enhanced mechanical properties. This paper aims to establish a clear link between production techniques and mechanical performance, highlighting the practical potential of these biocomposites for environmentally-conscious material solutions.
21 March 2025 in Archives of Metallurgy and Materials
This article is primarily concerned with the turning of Udimet L-605 alloy, which is crucial for a variety of applications, including the production of parts for the automotive, marine, and aircraft sectors. According to the researchers’ recommendation, dry machining was preferable for this machining, and the studies were conducted using a PVD-coated TiAlN-TiN tungsten carbide cutting tool insert. Depth of cut during the machining process is essential for enhancing surface smoothness and reducing tool wear during the turning process. Increased cutting zone temperature brought on by deeper cutting causes increased tool wear and subpar surface finish. In this study, a greater emphasis was placed on the surface morphology for the machined surface’s better and worse surface finishes. The peak and valley profiles created on the machined surface are mostly determined by kurtosis and skewness. The AFM study offered a clear indication of it. The average roughness of 34.77 nm was attained. Nearly 23% tool tip interface temperature was increased with increase of depth of cut.
1 October 2026 in Polymer Composites