The purpose of this study was to build a flexible mechanical system with a hydrostatic skeleton. The main components of this system are two type flexible bags. One is a structural bag with constant inner pressure. The other is an actuator bag with controlled inner pressure. To design the system, it was necessary to estimate both structural deformation and driving force. Numerical analysis of flexible bags, however, is difficult because of large nonlinear deformation. This study analyzed structural strength and driving force of flexible bags with the nonlinear finite element analysis (FEA) software ABAQUS. The stress concentration dependency on the bag shape is described and the driving force is calculated to include the large deformation. From the analytical results, this study derives an empirical equation of driving force. The validity of the equation was confirmed by condition-changed analyses and experimental results.
Almost all of conventional mobile robots for narrow spaces exploration, e.g. rescue robots, adopt crawler or wheel mechanisms. However, in narrow spaces, such robot is often stuck because the robot body is sandwiched between both sides of a terrain. Especially, with normal crawler or wheel mechanisms, it is impossible to penetrate into narrow spaces lower than the height of the robot. In addition, sealing bushes of drive shaft cause unignorable energy loss because of rotational resistances. In order to solve these problems, this study proposes an innovative flexible robot with new hydrostatic skeleton driving mechanism. The main components of the robot are a hermetically-sealed outer cover with looped structure and flexible crawlers with hydrostatic skeleton named HS crawlers. This new robot provides remarkable advantages in narrow spaces as listed below: i) The robot can change its shape adapting to terrain; ii) All ground contact areas of the robot are driven toward the same direction. Thus, the robot is able to penetrate into narrow spaces changing its shape even if the terrain is rather narrower than the size of the robot. This paper describes the mechanisms of the robot and the detail of the HS crawler. Driving force of the HS crawler is discussed with comparison of simulation and experiment. Performance of first prototype robot is verified by experiments of wireless driving and passing narrow space. The prototype robot could pass through a space of 300 mm height, whereas the ordinary height of the robot is 420 mm
This paper describes group robots adaptively construct a mechanical structure. The feature of the robots is high rigidity by adopting sliding mechanisms. This study discusses algorithms of crawl motion and adaptive construction considering mechanical constraints of the robots. The proposed algorithm is based on local communication of the robots. We introduce a scheme of a temporary leader which is autonomously specified by form of the structure. The scheme decreases amount of information in communication between the robots. The experimental demonstrations are also shown in this paper
1 January 2003 in TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A