For precision micro-drilling, it is necessary to have sufficient axial stroke, controllable electromagnetic force, and stable compliant guidance. This study proposes a computational selection procedure based on constraints and verifies the selected configuration by experiments for a flexure-guided voice coil actuator. A 380° spiral flexure, which was analyzed by finite element analysis, has a thickness of 0.6 mm, shape factor of 0.06, and an axial stiffness of 1.7 N/mm as reported. Analytical electromechanical models were used to compare 300-turn, 450-turn, and 600-turn windings at 18 V in terms of predicted stroke, force, resistance, current, and effective stiffness. The 5 mm stroke requirement eliminates the 300-turn (2.1 mm) and 450-turn (4.0 mm) candidates; the 600-turn design is predicted to be 6.2 mm and is chosen for fabrication. The prototype is rated at 16 V: 5.05 mm, 19.4 N; 18 V: 5.80 mm, 22.8 N; and starts moving at around 3 V; the highest coil temperature recorded after 10 minutes of modulation is 48°C. The results confirm the transparent and finite-candidate engineering selection and axial-motion feasibility but not global optimality, closed-loop positioning, and improved drilling quality.