1 February 2020 in Applied Energy
23 January 2018 in IEEE Transactions on Industrial Electronics
This paper provides a theoretic and systematic analysis on the battery state of charge (SOC) estimation errors caused by sensor noises. The considered noises include the bias and the variance of both current and voltage sensors. Specifically, the bias and the variance of the SOC estimation error are derived as explicit functions of sensor noises, battery parameters, and observer tuning parameters. The derivation is performed for the Kalman filter, which is the most commonly used method for SOC estimation, and the least squares method. It is found that the observer parameter tuning is subject to a tradeoff between suppressing the estimation bias and variance. Either one of these two errors becomes dominant under different observer parameter ranges. The fundamental estimation error that cannot be mitigated through observer tuning has also been identified. The results have been validated by both simulation and experiment. The obtained theoretical findings are of great practical significance as they could be used to guide sensor selection and observer design, as well as enable online uncertainty management.
25 January 2019 in IEEE Transactions on Control Systems Technology
4 June 2020 in IEEE Transactions on Transportation Electrification
Battery management for plug-in electric vehicles (PEV) has attracted extensive research attention, with most existing studies focusing on PEV operating conditions. However, battery maintenance during idling remains largely unexplored, under which electrochemical side reactions can cause battery degradation. The degradation rate depends on battery states, e.g. state of charge (SOC) and temperature. Considering that PEV idling accounts for majority of the time, the accumulated degradation could have a major impact on battery and vehicle lifetime. In this paper, battery maintenance during extended idling periods is investigated by utilizing a commonly available infrastructure, i.e. the charging unit. An optimal charging profile is designed to maintain the battery states under desirable conditions to minimize degradation over the idling period while still satisfying the charging energy requirement. Optimal charging profiles are obtained under different ambient temperatures and stages of battery life, showing different features due to respective dominating degradation mechanisms. Compared with the optimal charging profile, constant-current charging could result in up to 51.6% higher capacity loss, and that of (fast) constant-currentconstant- voltage charging could be up to 12.3 times higher under circumstances over a 12-hour overnight idling period. Integration/accommodation of user and grid demand is also addressed by augmenting the optimization framework.
24 July 2018 in IEEE Transactions on Power Electronics
This paper presents the analysis, design, and experimental validation of parameter identification of battery/supercapacitor hybrid energy storage system (HESS) for the purpose of condition monitoring and maximum power estimation. The analytic bounds on the error of battery and supercapacitor parameter identification, considering voltage measurement noise, are obtained based on the Fisher information matrix and Cramer-Rao bound analysis. The identification of different parameters requires different signal patterns to ensure high accuracy, rendering tradeoffs in the multi-parameter identification process. With an appropriately designed current profile, HESS parameters are identified using recursive least squares with a forgetting factor. Moreover, tThe identified parameters are then used to estimate the maximum power capability of the HESS. The maximum power capabilities of the battery and supercapacitor are estimated for both 1s and 30s time horizons. The parameter identification algorithm can be applied to systems including either batteries or supercapacitors when the optimal excitation current can be injected. Experimental validation is conducted on an HESS test-bed, which shows that the proposed algorithm is effective in estimating the HESS maximum power based on appropriate current excitation.
15 June 2017 in IEEE Control Systems Letters
This letter investigates the fundamental relationship between the estimation accuracy of the equivalent circuit dynamics and the measurement data, i.e., input current and output voltage. Specifically, the Cramer–Rao bounds of the model parameter estimation are derived analytically as explicit functions of generic input/output data. The derivation is performed in both discrete-time and Laplace representation, and for both single- and multi-variable estimation scenarios. The sinusoidal current input is then used as an example for illustration. The analytic results could benefit the estimation practice in multiple ways, including the estimation reliability/robustness evaluation, offline experiment design for system identification, and data selection for online estimation.