22 July 2011 in Journal of Applied Oral Science
The purpose of this study was to investigate the effect of different air-polishing powders on the color stability of different types of composite resin restorative materials. Thirty cylindrical specimens (15×2 mm) were prepared for each of 7 composite resin restorative materials. All specimens were polished with a series of aluminum oxide polishing discs (Sof-Lex). The prepared specimens of each composite resin were randomly divided into 3 groups of 10 specimens each, for control (Group-C) and two air-powder applications (Group-CP: Cavitron Prophy-Jet; Group-PS: Sirona ProSmile prophylaxis powder). A standard air-polishing unit (ProSmile Handly) was used. All specimens were air-powdered for 10 s at 4-bar pressure. The distance of the spray nosel from the specimens was approximately 10 mm and angulation of the nosel was 90º. Specimens were stored in 100 mL of coffee (Nescafe Classic) for 24 h at 37ºC. Color measurement of all specimens was recorded before and after exposure to staining agent with a colorimeter (Minolta CR-300). Color differences (∆E*) between the 2 color measurements (baseline and after 24 h storage) were calculated. The data were analyzed with a 2-way ANOVA test, and mean values were compared by the Tukey HSD test (p≤0.05). According to the 2-way ANOVA results, composite resin restorative materials, air-polishing powders, and their interaction were statistically significant (p.05) and these groups demonstrated the highest ∆E* values. For Filtek Silorane and IntenS, the highest ∆E* values were observed in Group-PS. The lowest ∆E* values for all composite resin groups were observed in Group-C. When comparing the 7 composite resin restorative materials, Aelite Aesthetic Enemal demonstrated significantly less ∆E* values than the other composite resins tested. The highest ∆E* values were observed in Quixfil. Except for Quixfil, all control groups of composite resins that were polished Sof-Lex exhibited clinically acceptable ∆E values (<3.7). Air-polishing applications increased the color change for all composite resin restorative materials tested. Composite restorations may require re-polishing after air-polishing.
31 December 2021 in European Annals of Dental Sciences
Purpose: This study evaluated the microhardness and surface roughness of four artificial teeth type against various beverages. Materials and Methods: Conventional acrylic resin, reinforced acrylic resin, microfiller composite resin, and nanofiller composite resin teeth were used. From each group, 10 maxillary first and second molars were immersed in 5 beverages (tea, filtered coffee, cola, cherry juice, and distilled water. The test period of 24 hours appears comparable to approximately 1 month of normal beverage consumption. The test periods used in this study were arranged according to this protocol and 1 week, 1 month, 3 months and 6 months of normal beverage consumptions were simulated. Vickers microhardness and surface roughness of denture teeth were measured for each test period. Results: The microhardness values significantly decreased in all beverages especially in 6th month. The surface roughness values significantly increased in all beverages especially in 3th month. There were no statistically significant differences between the beverages. Microfiller composite resin denture teeth had the highest microhardness values and the lowest surface roughness values. Conclusions: Different types of beverages consumed daily negatively affect the microhardness and surface roughness of artificial teeth. Microfiller composite resin teeth could have the ideal surface properties
29 April 2025 in HRU International Journal of Dentistry and Oral Research
The world is on the brink of environmental crises, making the role of the healthcare sector increasingly critical. Dentistry is in a position to be a pioneer in this transformation with both its impact on the global environment and its potential to shape the future of sustainable healthcare. Efforts in the sector embody green dentistry, including eco-friendly practices.. In this context, green dentistry is an innovative approach that minimises environmental damage and prioritises patient safety by using resources in the most efficient way. Elements such as waste management, energy efficiency and digitalisation are key components of this approach. It is not only an environmental requirement, but also an opportunity that increases patient satisfaction, provides efficient clinical management and economic benefits in the long term. Starting from the historical development of green dentistry, this study comprehensively addresses the methods that can be applied for sustainability. It also emphasises the importance of training programs and international collaborations to raise the awareness of dentists and healthcare professionals. The dissemination of environmentally friendly practices can transform the entire healthcare system, not just the dental practices or polyclinics. Raising awareness of green transformation in the sector, developing sustainable policies and adopting feasible solutions at the individual level are critical to the success of the idea. Future studies should focus on innovative methods that will increase the applicability of this framework. In the future, thanks to innovation and conscious policies, more sustainable and effective dental practices with minimised environmental impact will be at the forefront.
31 August 2022 in European Annals of Dental Sciences
Aim: New types of denture teeth using modified acrylic resin that incorporate cross-linking agents and composite resin containing different types of filler have become increasingly common. It has been possible to produce nano-sized filler particles with nanotechnology. However, evidence-based information regarding composition and properties is lacking. The purpose of this study was to evaluate the colour stability of four commercially available denture tooth materials with different chemical structure when subjected to various beverages. Methods: Conventional acrylic resin, reinforced acrylic resin, microfiller composite resin, and nanofiller composite resin teeth with different brands were used, for a total of four different denture teeth groups. Denture teeth were subjected to four beverages (tea, filtered coffee, cola, and cherry juice) and distilled water as control. The test period of 24 hours appears comparable to approximately 1 month of normal beverage consumption. The test periods used in this study were arranged according to this protocol and 1 week, 1 month, 3 months and 6 months of normal beverage consumptions were simulated. From each group, 10 maxillary first molar denture teeth were immersed in each of the five solutions. The baseline, 1st week, 1st month, 3rd month and 6th month values for colour change of denture teeth were measured. Results: The differences of each value were calculated by one-way ANOVA statistically. For colour changes (ΔE) there was no significant difference among the specimens immersed in distilled water (Tukey HSD test, p>0.01). The highest colour changes were recorded for the specimens of Integral and Major immersed in cola, whereas for the specimens of Veracia and Orthosit immersed in tea (Tukey HSD test, p<0.01). Conclusions: Within the limitations of this study, daily intake of common beverages may lead to colour changes of denture teeth. Microfiller composite resin denture tooth material is recommended due to its improved physical properties.