In order to study the axial compression behavior of rectangular concrete short columns that have been strengthened with basalt fiber-reinforced polymer sheets, the axial compression test were conducted on 15 groups specimens. The parameters are the cross aspect ratio and the number of basalt fiber-reinforced polymer layers. As the aspect ratio increases, the confined effect of basalt fiber-reinforced polymer decreases. The strength of one ply of basalt fiber-reinforced polymer decreases as the aspect ratio increases, the range is not very obvious, but the two ply of basalt fiber-reinforced polymer has the obvious decreasing tendency. With the increase in aspect ratio, the square and rectangular section columns of basalt fiber-reinforced polymer confined have a certain size effect. When the aspect ratio is 1.0, the values of fcc/fc0 by one ply of basalt fiber-reinforced polymer and two ply of basalt fiber-reinforced polymer are 1.14 and 1.50, respectively. And when the ratio is 2.0, the values of fcc/fc0 are 1.06 and 1.16. The confined effect is best when the aspect ratio is 1.0, while there is no significant effect with the ratio of 2.0. Results of the theoretical analysis compared with the experimental results show good agreement.
With the continuous development of Earth science, soil temperature has received more and more attention in Earth system research as an important parameter. The change of soil temperature (Ts) in different regions and related time series is affected by many factors, which bring certain difficulties to the accuracy of soil temperature prediction and the robustness of the algorithm. In this paper, an embedded network prediction model based on the gated recurrent unit (GRU) model is proposed to learn the local and global features of historical temperature for improving the prediction performance of soil temperature. We input different steps into the GRU model, and the output is weighted to obtain the final prediction result. In order to obtain the global characteristics of soil temperature, we connect the previous steps to the output layer directly, and the local characteristics of soil temperature are obtained through the following steps. This paper uses the soil temperature data from two meteorological stations (Laegern and Fluehli) in Switzerland as the input data to predict the soil temperature for different soil depths (5 cm, 10 cm, and 15 cm) at different time points (6 hrs, 12 hrs, and 24 hrs), using RMSE, MAE, MSE, and performance indicators as evaluation criteria to verify the accuracy of prediction. As the experimental results show, our method has the best performance compared to the others (artificial neural networks (ANN), extreme learning machine model (ELM), long short-term memory network (LSTM), gated recurrent unit network (GRU)). In particular, we estimated the soil temperature at the soil depth of 10 cm of the Fluehli station in the coming 6 hrs; our method achieved the best performance; and, meanwhile, our model achieved the maximum value of (0.9914) and the minimum values of RMSE (0.4668), MAE (0.2585), and MSE (0.2214) compared with the other four models. Therefore, our model can not only predict the soil temperature at different depths but also improve the accuracy.
The aim of this study is to improve the bond performance of basalt fiber reinforced polymer (BFRP) bars and recycled aggregate concrete (RAC) after being exposed to high temperatures. The bond behavior (failure modes, bond strength, bond stress-slip curves) between BFRP bars and hybrid fiber recycled aggregate concrete (HFRAC) after being exposed to temperatures ranging from 20°C up to 500°C was studied by using pull-out tests. The effect of high temperatures on mechanical properties of concrete (compressive strength, splitting tensile strength) and tensile strength of BFRP bars was also investigated. The bond strength decreased as the temperature increased and the drop of bond strength between RAC and BFRP bar was larger than that between HFRAC and BFRP bar. As the temperature rises, the key factor affecting the bond strength was gradually transformed from concrete strength to BFRP bar strength. The relationship between bond stress and slip in the dimensionless bond stress-slip ascending section was established, which was in good agreement with the experimental results.
17 February 2022 in Computational Intelligence and Neuroscience
Soil temperature (Ts), a key variable in geosciences study, has generated growing interest among researchers. There are many factors affecting the spatiotemporal variation of Ts, which poses immense challenges for the Ts estimation. To enrich processing information on loss function and achieve better performance in estimation, the paper designed a new long short-term memory model using quadruplet loss function as an intelligence tool for data processing (QL-LSTM). The model in this paper combined the traditional squared-error loss function with distance metric learning between the sample features. It can zoom analyze the samples accurately to optimize the estimation accuracy. We applied the meteorological data from Laegern and Fluehli stations at 5, 10, and 15cm depth on the 1st, 5th, and 15th day separately to verify the performance of the proposed soil temperature estimation model. Meanwhile, this paper inputs the variables into the proposed model including radiation, air temperature, vapor pressure deficit, wind speed, air pressure, and past Ts data. The performance of the model was tested by several error evaluation indices, including root mean square error (RMSE), mean absolute error (MAE), Nash-Sutcliffe model efficiency coefficient (NS), Willmott Index of Agreement (WI), and Legates and McCabe index (LMI). As the test results at different soil depths show, our model generally outperformed the four existing advanced estimation models, namely, backpropagation neural networks, extreme learning machines, support vector regression, and LSTM. Furthermore, as experiments show, the proposed model achieved the best performance at the 15cm depth of soil on the 1st day at Laegern station, which achieved higher WI (0.998), NS (0.995), and LMI (0.938) values, and got lower RMSE (0.312) and MAE (0.239) values. Consequently, the QL-LSTM model is recommended to estimate daily Ts profiles estimation on the 1st, 5th, and 15th days.