InAs/InAs1−xSbx type II superlattices designed for mid-wavelength infrared photo-detection have been studied using several electron microscopy methods, with specific attention directed towards interface chemical diffusion caused by Sb segregation. Reciprocal-space image analysis using the geometric phase method showed asymmetric interfacial strain profiles at the InAs-on-InAsSb interface. Measurement of local Sb compositional profiles across the superlattices using electron energy-loss spectroscopy and 002 dark-field imaging confirmed asymmetric Sb distribution, with the InAs-on-InAsSb interface being chemically graded. In contrast, the InAsSb-on-InAs interface showed a small intrinsic interface width. Careful evaluation of the experimental Sb composition profiles using a combined segregation and sigmoidal model reached quantitative agreement. Segregation dominated over the sigmoidal growth at the InAs-on-InAsSb interface, and the segregation probability of 0.81 ± 0.01 obtained from the two microscopy techniques agreed well within experimental error. Thus, 81% of Sb atoms from the topmost layers segregated into the next layer during growth causing the interfaces to be broadened over a length of ∼3 nm. This strong Sb segregation occurred throughout the whole superlattice stack, and would likely induce undesirable effects on band-gap engineering, such as blue-shift or broadening of the optical response, as well as weakened absorption.
This paper reports 1.89 S/mm extrinsic transconductance, 4 A/mm drain current density, and 0.23 Ω-mm on-resistance on depletion-mode nitrogen-polar GaN MIS-HEMTs with a 5.4-nm GaN channel and a novel InAlN/AlGaN back barrier grown by MOCVD on a vicinal sapphire substrate. These dc figures of merit are among the best values reported for all GaN HEMTs. Additionally, an f T of 204 GHz using a 70-nm T-gate (14.3 GHz*μm f T* L g product) and an f max of 405 GHz using a 90-nm T-gate were obtained. These frequency figures of merit match the state-of-the-art Ga-polar devices with similar gate lengths. GaN-based HEMTs have demonstrated tremendous performance in high-frequency, high-power applications due to the high electron velocity, sheet charge density, and critical electric field of the III-N material system. The dc and high-frequency performance of N-polar and Ga-polar HEMTs has increased rapidly as the result of highly scaled device dimensions and advanced epitaxial structures [1]-[4].