Distributed temperature sensors have been proposed for a wide variety of scientific and industrial applications and represent an important technology for modern infrastructures. Due to the range of potential applications, distributed fiber optic sensors based on spontaneous Raman scattering have been studied both theoretically and experimentally. This paper presents the experimental evaluation of a distributed fiber optic temperature sensor based on spontaneous Raman scattering over a wide temperature range, from -196 °C to +400 °C. The sensor is implemented using a commercial OTDR, a standard EDFA amplifier and a standard optical fiber link. Besides, a special type of optical fiber for high temperature operation, featuring metallic coating, is also assessed as the sensor element. The integrity of the fibers following the exposure to the extreme temperatures is analyzed. The results provide values for the sensitivity, accuracy and resolution of the sensor in the wide range of temperatures.
Battery Energy Storage Systems (BESS) have gained popularity due to the importance of energy self-sufficiency for some systems. In this context, significant investments have been made in research to enhance the reliability of BESS operations. Addressing these reliability concerns, this work proposes using a refractometer based on a heterocore optical fiber to monitor electrolyte concentrations in real-time. This monitoring can be used to evaluate the battery health and optimize maintenance management. The sensor was fabricated using a 30.7 mm long no-core optical fiber between two multimode optical fibers, achieving a sensitivity of 0.0153 dB/(g/L).
We present an investigation of a hetero-core fiber optic refractive index sensor that performs measurements under the 1550 nm wavelength for chemical and biological applications. The structure is formed by a no-core fiber (N CF) spliced to a multimode optical fiber at each of its ends, forming a Multimode / No-core fiber / Multimode (MNM) structure, where the NCF fiber is the sensing part of the structure. The simple and low-cost interrogation scheme uses a laser and a photodetector. The sensor is able to measure refractive index variations with a resolution of $9.93\times 10^{-5}$ RIU.
This work investigates the influence of curvature radius on the response of plastic optical fiber (POF) sensors. Using polymethyl methacrylate (PMMA) fibers, sensors with different bending radii were fabricated through a controlled heating and cooling process. Their sensitivity was evaluated by immersing the curved fibers in sodium chloride solutions of varying concentrations and measuring the transmitted optical signal using a 650 nm LED and a photodetector. Results indicate a near-linear relationship between refractive index and output voltage for intermediate radii, with a maximum sensitivity of 13.613 V/RIU observed at a 4 mm curvature. Smaller radii enhance sensitivity due to increased signal interaction with the external medium, though at the cost of greater optical losses. Larger radii exhibit reduced sensitivity and narrower detection ranges. These findings underscore the importance of curvature optimization in designing refractive index sensors and provide valuable insights for selecting appropriate radii based on specific application requirements.