1 April 2024 in Physics of Fluids
This work sought to reveal the role of the inlet gas volume fraction (GVF) on the energy-conversion features of a multiphase pump. To this end, a self-developed single-stage multiphase pump was used as the research object, and a gas–liquid transport medium was examined based on the energy-transport theory. The role of the GVF in the pressure-gradient work, Lamb-vector divergence, and vortex pseudo-energy dissipation in the pressurization unit of the multiphase pump were analyzed, and the impact of the GVF on the energy-conversion features of the multiphase pump was also investigated. The results indicate that under various GVFs, increasing the tip clearance prevents the pressure gradient from exerting its intended function. Furthermore, as the GVF is increased, the scale of the tip-leakage vortex increases, the flow field in the pressurization unit is disturbed, and the vortex pseudo-energy dissipation in the impeller increases. As a result, the energy loss increases, the pressurization effect of the pump is weakened, and its work performance decreases. These results offer a reference for enhancing the efficiency of multiphase pumps.
1 August 2025 in Physics of Fluids
The helical-bladed multiphase pump demonstrates significant advantages in transporting complex media. However, the presence of solid particles complicates the fluid–structure interaction mechanism, posing challenges to studying solid–liquid two-phase flow within the pump. This research focuses on a self-developed three-stage helical-bladed multiphase pump, employing numerical simulation with experimental validation, to systematically investigate the effect of particle mass concentration (Cm = 1‰, 5‰, and 1%) on particle motion characteristics. The results indicate particle velocity distribution follows similar trends under different Cm conditions. In the impeller flow passage, the circumferential velocity of particles increases significantly while axial velocity changes marginally. Upon entering the guide vanes, circumferential velocity decreases, whereas axial velocity increases. The absolute velocity rises axially along each impeller stage but declines axially in each guide vane stage. As Cm increases, particle backflow intensifies, leading to aggravated flow blockage in the reflux zone at the first-stage impeller inlet. Under high-concentration conditions, particles aggregate into clusters within the flow passage, elevating collision probability. Particle distribution shifts from low-speed to medium-speed regions: dispersed at low Cm but concentrated toward medium-speed zones at medium-to-high Cm. Particle collision frequency rises with Cm, with increased proportions of collisions against the shroud and hub but decreased proportions against blades. The total particle–wall contact force escalates with higher Cm, with impeller-wall forces exceeding guide-vane-wall forces. In the guide vane region, contact forces distribute as blades > shroud > hub. These findings elucidate the kinetic characteristics of solid particles, providing a basis for the optimal design of multiphase pumps.
1 September 2024 in Physics of Fluids
To explore the gas–liquid interaction processes in a spiral-vane-type multiphase pump, the influence of the operating parameters on the interaction forces between the two flow phases was studied. The results show that the gas–liquid interaction forces in the impeller domain of the spiral-vane-type pump are significantly stronger than those in the diffuser domain. Specifically, the drag is four orders of magnitude greater than the lift and the virtual-mass force, and the turbulent dispersion force is the smallest. The inlet gas volume fraction (IGVF) of the multiphase pump was found to have little effect on the drag near the hub, and the effect is greater near the shroud. Increasing the IGVF was found to increase the proportions of lift and virtual-mass force in the multiphase pump to varying degrees, while the turbulent dispersion force remained almost unaffected. The influence of the rotational speed on the gas–liquid interphase forces in the multiphase pump mainly occurs in the impeller domain, and the specific performance of each force varies greatly with the axial position.
1 August 2025 in Physics of Fluids
As core energy conversion equipment in pumped storage plants, reversible pump-turbines face unstable flows with vortices under off-design conditions, threatening operational safety. Revealing the internal unstable flow mechanism is essential to ensure the stable operation of the pump-turbine. This study employs third-generation vortex identification to investigate: (1) spatial distributions of strong/weak vortices, (2) vortex dynamics during rigid vortex evolution, and (3) the relationship between vortex vector characteristics and secondary flow. Results demonstrate that reducing guide vane openings induces secondary flow, altering vortex distribution patterns. Before and after the reduction of opening, the vortex undergoes an evolution process of “separation-dissipation-derivation-reproduction.” Analysis of the vorticity transport equation reveals rigid vorticity dilatation term transport facilitates vortex separation, while variations in the curl term of the pseudo-Lamb vector and the Coriolis force term transport govern vortex dissipation and derivation. At the same time, this paper decomposes the rigid vortex into cylinders to restore its own vector characteristics, and finds that the vortex exists in pairs. The rigid vortex, decomposed into cylinders, is dominated by its circumferential component, which causes runner inlet flow separation and secondary flow derivation. Changes in the vortex circumferential component and diagnostic function SI > 1 clarify its coupling with flow conditions. These findings offer theoretical support for mitigating unstable flow and enhancing unit safety.