20 October 2013 in Nature Photonics
10 November 2017 in IEEE Journal of Selected Topics in Quantum Electronics
Ultrafast lasers operating at high repetition rates, in particular, the GHz range, enable new possibilities in laser- material processing, particularly accessing the recently demon- strated ablation-cooled regime. We provide a unified perspec- tive of the unique opportunities created by operating at high repetition rates together with our efforts into the development of enabling laser technology, including new results on further scaling up the capabilities of the laser systems. In order to access GHz repetition rates and microjoule-level pulse energies without requiring kilowatts of average power, we implement burst-mode operation. Our results can be grouped into two distinct directions: low- and high-power systems. Pulsed pumping is employed in the latter stages of low-power systems, which have low burst repetition rates to achieve high pulse energies, while the technique of doping management is developed for the continuously pumped power amplifier stage of high power systems. While most of the developments have been at 1-μm wavelength range due to the relative maturity of the laser technology, we also report the development of Tm-fiber lasers around the 2-μm region specifically for tissue-processing and laser-surgery applications.
29 January 2018 in Optics Letters
We report on a 72 W Yb all-fiber ultrafast laser system with 1.6 GHz intra-burst and 200 kHz burst repetition rate developed to demonstrate ablation-cooled material removal at high speeds. Up to 24 W is applied on Cu and Si samples with pulses of , and record-high ablation efficiencies are obtained, compared to published results to date, despite using only pulses. Ablation speeds approaching are reported with 24 W of average power, limited by available laser power and beam scanning speed. More significantly, these results experimentally confirm the theoretically expected linear scaling of the ablation-cooled regime to higher average powers without sacrificing efficiency, which implies that further scaling is possible with further increases in laser power and scanning speeds.
22 June 2012 in Optics Letters
We demonstrate burst-mode operation of a polarization-maintaining Yb-doped fiber amplifier capable of generating 60 μJ pulses within bursts of 11 pulses with extremely uniform energy distribution facilitated by a novel feedback mechanism shaping the seed of the burst-mode amplifier. The burst energy can be scaled up to 1 mJ, comprising 25 pulses with 40 μJ average individual energy. The amplifier is synchronously pulse pumped to minimize amplified spontaneous emission between the bursts. Pulse propagation is entirely in fiber and fiber-integrated components until the grating compressor, which allows for highly robust operation. The burst repetition rate is set to 1 kHz and spacing between individual pulses is 10 ns. The 40 μJ pulses are externally compressible to a full width at half-maximum of 600 fs. However, due to the substantial pedestal of the compressed pulses, the effective pulse duration is longer, estimated to be 1.2 ps.
1 December 2008 in Optics Communications