4 April 2017 in IEEE Transactions on Electron Devices
A high-quality and stable electron device of aligned gold nanogap arrays is demonstrated by using a well-controlled method with electron beam lithography and focused ion beam. Sub-30-nm nanogap arrays could be precisely fabricated with reproducibility. Field emission (FE) properties of the nanogaps are directly measured in the vacuum chamber of scanning electron microscopy with a nanomanipulator. Experimental investigation and calculations are carried out to reveal the transition process from the leakage current to the FE. Importantly, the controllable method could allow us to readily construct varying nanospacings. Besides, we also illustrate the independence of emission current on the vacuum degree over a large range, widening the applied range of the devices. These studies clearly demonstrate that electronic devices with sub-30-nm vacuum channel can be readily achieved by coupling varying nanogaps into nanostructures. It may pave the way for exploring the physics in tunneling transport devices, and therefore enable a new generation of high-performance, high-speed and low-cost electronic devices.
12 November 2019 in Nanotechnology
High quality nanoscale vacuum channel transistors (NVCTs) enable carriers to transport ballistically through the vacuum nanogap, achieving high speed and frequency characteristic which are essential for on-chip vacuum electronic devices. However, the studies to date have been largely confined to explore the common electrical performance, while the fast response characteristic of NVCTs remains a challenge. We report the fabrication of metal-based NVCT, with sub-100 nm vacuum channel and specific designed in-plane collection structure which can enhance the emission or collection efficiency of the electrons simultaneously. Importantly, the demonstration of a rise/fall time of less than 100 ns is achieved, which is compatible with those high-quality solid-state transistors based on low-dimensional materials. Moreover, the device can also retain excellent electrical performance, exhibiting a high drive current (>10 μ A), low work voltage (10 4 ). The verification of fast temporal response of NVCT makes a significant step towards on-chip vacuum electronics with high speed and integration.
17 January 2020 in Journal of Physics D: Applied Physics
In this paper, a nanoscale vacuum channel transistor (NVCT) with a side-gate structure is fabricated by standard electron beam lithography. The states of the proposed NVCTs could be effectively modulated by side-gate bias, exhibiting a drive current (>400 nA), low work voltage (103). Moreover, we further optimize the shapes of the electrodes, demonstrating that the electric performance is closely related to the structure parameters. The side-gate NVCT offers an alternative method to fulfill the on-chip vacuum devices with high integration.
29 June 2020 in Nanoscale Advances
Nanoscale vacuum channel transistors (NVCTs) are promising candidates in electronics due to their high frequency, fast response and high reliability, and have attracted considerable attention for structural design and optimization.
11 December 2019 in Journal of Applied Physics
Due to its atomically ultrathin morphology and superior optoelectronic properties, graphene has been broadly studied and utilized in phototransistors, photoconductors, or heterojunction nanostructures. However, in practical devices, the disadvantages of graphene should be concerned for its high dark current, very low on/off ratio, and high-priced fabrication cost. We report the photodetecting of the graphene/insulator/silicon heterojunction. The insulator layer is optimized to achieve balanced optoelectronic properties in terms of an Iph/Idark ratio of 4.17 × 103, a responsivity of 35 mA W−1, and a detectivity of 6.39 × 1010 Jones at a wavelength of 658 nm, with low operating voltage and static power dissipation (0.84 nW). Besides, response speed and degradation in the environment are tested. The mechanisms are revealed and analyzed by I-V measurements.