Takayuki Kikuchi

Takayuki Kikuchi

Auto-generated profile, based on publicly available information

Takayuki Kikuchi

Research Center for Materials Nanoarchitectonics (MANA), National Institute for Materials Science (NIMS), 1-1 Namiki, Tsukuba, Ibaraki 305-0044, Japan

Research Focus & Metrics

Academic Career Length

27Years (2000-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 September 2013
Verified
Conference Paper
Closed access
KFKansuke Fujii
Kansuke Fujii
TKTakayuki Kikuchi
Takayuki Kikuchi
HKHisashi Koubayashi
Hisashi Koubayashi
KYKazuyuki Yoda
Kazuyuki Yoda
A multi-level topology is one of the effective approaches to improve the efficiency of power converters. Recently, three-level converters are used not only in medium voltage converters but also in low voltage converters in order to improve the conversion efficiency. Advanced T-type NPC (AT-NPC) converter belongs to three-level converters and utilizes Reverse-Blocking IGBT (RB-IGBT) as a bi-directional switch. The AT-NPC topology is simple and enables low conduction losses of the converters. This time, the authors develop a 1-MW photovoltaic converter using AT-NPC topology. This photovoltaic converter is outdoor-type transformer-less single-stage converter, and consists of four 250-kW power units. In addition, to reduce EMI from the converter, the neutral point of the LC filter is connected to the medium point of the DC-link voltage. This paper describes the features of this solar power inverter, power units using AT-NPC IGBT modules connected in parallel and the evaluation results.

24 February 2025 in ACS Applied Energy Materials
Verified
Journal Article
Open access
UKUttam Kumar
Uttam Kumar
EPEmmanuel Picheau
Emmanuel Picheau
HLHuanran Li
Huanran Li
ZZZihan Zhang
Zihan Zhang
TKTakayuki Kikuchi
Takayuki Kikuchi
RMRenzhi Ma
Renzhi Ma

14 November 2022 in Journal of Materials Chemistry A
Verified
Journal Article
Closed access
PDF file
CWChenhui Wang
Chenhui Wang
NSNobuyuki Sakai
Nobuyuki Sakai
YEYasuo Ebina
Yasuo Ebina
SSShigeru Suehara
Shigeru Suehara
TKTakayuki Kikuchi
Takayuki Kikuchi
TSTakayoshi Sasaki
Takayoshi Sasaki
A pelletized self-supported cathode based on a pairwise/sandwich-like assembly of a TaO3 nanomesh and reduced graphene oxide for high-areal-capacity Li–S batteries.

10 October 2025 in JACS Au
Verified
Journal Article
Open access
TKTakayuki Kikuchi
Takayuki Kikuchi
YEYasuo Ebina
Yasuo Ebina
NSNobuyuki Sakai
Nobuyuki Sakai
YSYoshiyuki Sugahara
Yoshiyuki Sugahara
TSTakayoshi Sasaki
Takayoshi Sasaki
RMRenzhi Ma
Renzhi Ma
Structural coloration has been reported for many types of two-dimensional (2D) materials, including metal oxide nanosheets. In particular, metal oxide nanosheets feature a wealth of composition and structure, but their impact on structural color has not been explored. In the current study, we report the structural coloration observed for aqueous suspensions of three types of transition metal oxide nanosheets (Ti1.73O4 1.08–, TiNbO5 –, and Ti2NbO7 –) obtained via the exfoliation of precursory layered compounds with tetramethylammonium hydroxide (TMAOH). It was revealed that a minute amount of TMA+ was retained even after deionization via repeated centrifugation, acting as countercations to the negatively charged nanosheets. These residual TMA+ ions contributed to stabilizing the dispersion of nanosheets under low-ionic-strength conditions, while the intersheet spacing was expanded to a magnitude comparable to the wavelength of the visible-light range, resulting in structural coloration. The wavelength of structural colors was dependent not only on nanosheet concentration but also on the type of nanosheets, correlating with the charge (ζ-potential) and thickness of the nanosheets, as well as the amount of TMA+ dissociated from the nanosheet surfaces. Specifically, TiNbO5 – was featured with the highest amount of TMA+ in the solution, which screened the negative charge of the nanosheets and resulted in the smallest intersheet spacing. On the other hand, when the dissociated amount of TMA+ was diminished, Ti2NbO7 –, with a larger thickness, yielded a larger intersheet spacing than that of Ti1.73O4 1.08–. These findings provide a valuable clue to the rational control of structural colors derived from nanosheets with different compositions and structures for a wide range of applications.

6 March 2000 in SAE International Journal of Advances and Current Practices in Mobility
Verified
Conference Paper
Closed access
PDF file
TKT. Kikuchi
T. Kikuchi
YOY. Osugi
Y. Osugi
MTMarco Tani
Marco Tani
TET. Enokijima
T. Enokijima
SYS. Yokoi
S. Yokoi
TST. Soma
T. Soma
A newly designed, flat, angular-rate sensor consisting of T-shaped vibrating resonators using a single quartz crystal has been developed for automotive, chassis-control systems and vehicle navigation systems. For these systems, the sensor is required to be highly stable under operating conditions. Our newly developed sensor's performance is highly reliable because the resonator is made of quartz that is highly stable under operating conditions, especially temperature changes. The newly developed quartz angular sensor is easy to fabricate because it has a 2-dimensional structure. This structure facilitates the mass production of the sensor at low cost; a requirement for automotive industry use. The flat sensor (0.3mm thick) is fabricated from z-cut quartz and shows promising performance for automotive applications. The flat structure also has the advantage of being easily mounted in flat, narrow spaces.

4 August 2025 in Inorganic Chemistry
Verified
Journal Article
Open access
ATAranee Pleng Teepakakorn
Aranee Pleng Teepakakorn
TTTomohiro Tanaka
Tomohiro Tanaka
NSNobuyuki Sakai
Nobuyuki Sakai
YEYasuo Ebina
Yasuo Ebina
TKTakayuki Kikuchi
Takayuki Kikuchi
TSTakayoshi Sasaki
Takayoshi Sasaki
We systematically explored the formation range of α-NaFeO2-type layered titanate and its ion-exchange behaviors and electrochemical performance. The layered sodium titanate of NaxTi1-x/3Lix/3O2 at x = 0.68-0.70 was synthesized by the solid-state reaction at 900 °C. The titanate is composed of coplanar host layers with the α-NaFeO2-type structure. The interlayer Na+ ions underwent a facile exchange with other alkali metal ions in aqueous solutions at 80 °C, accompanied by concurrent exchange with proton/oxonium ions. Powder X-ray diffraction data on the products and their Rietveld refinement revealed the formation of a unique staging-structured titanate, in which the interlayer galleries are alternately occupied by incoming alkali metal ions and oxonium ions. The electrochemical intercalation-deintercalation properties for Li+ and Na+ ion storage were examined on the pristine sodium titanate and its ion-exchanged derivatives. The staging structure was found to provide superior electrochemical performance, which may be due to the rather open nature of the interlayer galleries, providing abundant sites for Li+ and Na+ ions.