The purpose of this paper is the elimination of interruptions of electrical energy produced by a multi-source production system, so we have assured the feed of DFIG rotor in a wind system by different energy sources (photovoltaic generator, battery group) and switchover between them by auxiliary contacts controlled by a supervisor via a power control algorithm. For the photovoltaic generator, a controller for tracking the maximum power point is designed using direct search approach perturb observe method. For the battery group, the installation of a number of the capacitor battery elements in series and in parallel will be kept the power necessary to supply the DFIG rotor. For the wind system, it contains the power generated by DFIG is controlled by sliding mode system. With regard to switching between electrical energy sources, our proposed system relies on an algorithm to compare the energies produced by each generator with the energy required to feed the DFIG rotor and the energies consumed in the system, where the energy source with high production energy and available is exploited to feed the system and charge the batteries. Simulations were performed to confirm the reliability and efficacy of the system proposed.
1 June 2021 in International Journal of Power Electronics and Drive Systems (IJPEDS)
In this paper, a detail design and description of a predictive current control scheme are adopted for three-phase grid-connected two-level inverter and its application in wind energy conversion systems. Despite its advantages, the predictive current controller is very sensitive to parameter variations which could eventually affected on system stability. To solve this problem, an estimation technique proposed to identify the value of harmonic filter parameter based on Model reference adaptive system (MRAS). Lyapunov stability theory is selected to guarantee a robust adaptation and stable response over large system parameter variation. The simulation results shows the efficiency of the proposed techniques to improve the current tracking performance.
1 January 2026 in ITEGAM- Journal of Engineering and Technology for Industrial Applications (ITEGAM-JETIA)