11 January 2024 in Nature Reviews Electrical Engineering
MKMuhammed Ahosan Ul Karim
+1
21 February 2024 in IEEE Transactions on Circuits and Systems I: Regular Papers
Over the past decade, numerous compute-in-memory (CIM) platforms have been proposed in the literature. While emerging non-volatile memory based analog CIM (ACIM) has been widely studied, its silicon demonstrations are in the mature legacy node (22 nm or above). As an alternative, digital CIM (DCIM) based on static random access memory (SRAM) is recently drawing significant attention, as it enjoys the scaling benefits with the logic process to the leading-edge node (5 nm or below), and does not suffer from the accuracy loss due to process/voltage/temperature (PVT) variations. To assess the potential of DCIM in the future, we release NeuroSim V1.4, a CIM benchmark framework, which supports advanced technology nodes down to 1 nm node. We project the technology parameters (standard cell, transistor and interconnect) using TCAD device simulations, interconnect modeling, and the available industry/IRDS roadmaps. State-of-the-art technology trends such as fin-depopulation, buried power rail, stacked nanosheet, etc are captured in the updated parameters. Technology scaling down to 1 nm enables DCIM to achieve 1.4 $\sim$ 1.8 $\times$ and 44.1 $\sim$ 63.1 $\times$ higher system-level figure of merit than state-of-the-art 7 nm SRAM-based ACIM and 22 nm RRAM-based ACIM, respectively, for representative workloads such as ResNet18 and ResNet34 inference.
24 October 2025 in IEEE Transactions on Computers
The Last Level Cache (LLC) is the processor’s critical bridge between on-chip and off-chip memory levels - optimized for high density, high bandwidth, and low operation energy. To date, high-density (HD) SRAM has been the conventional device of choice; however, with the slowing of transistor scaling, as reflected in the industry’s almost identical HD SRAM cell size from 5 nm to 3 nm, alternative solutions such as 3D stacking with advanced packaging (i.e., hybrid bonding) are pursued (as demonstrated in AMD’s V-cache). Escalating data demands necessitate ultra-large on-chip caches to decrease costly off-chip memory movement, pushing the exploration of device technology towards monolithic 3D (M3D) integration, where transistors can be stacked in the back-end-of-line (BEOL) at the interconnect level. M3D integration requires fabrication techniques compatible with a low thermal budget (<400°C). Among promising BEOL device candidates are amorphous oxide semiconductor (AOS) transistors, particularly desirable for their ultra-low leakage (seconds) when used in a gain-cell configuration. This paper examines device, circuit, and system-level tradeoffs made when optimizing BEOL-compatible AOS-based 2-transistor gain cells (2T-GC) for LLC. A cache early-exploration tool, NS-Cache, is developed to model caches in advanced 7 & 3 nm nodes and is integrated with the Gem5 simulator to systematically benchmark the impact of the newfound density/performance when compared to HD-SRAM, MRAM, and 1T1C eDRAM alternatives for LLC.
21 March 2025 in IEEE Electron Device Letters
In this letter, a ferroelectric field effect transistor (FeFET)-based charge-domain ternary content addressable memory (TCAM) is experimentally demonstrated for in-memory search. Specifically, foundry based FeFETs are configured in non-volatile capacitor (nvCAP) mode for charge-domain computation. A single TCAM cell consisting of 2 nvCAPs (i.e. two FeFETs) is used to perform the Store: bit ‘0’, ‘1’, ‘X’ and Search: bit ‘0’, ‘1’, ‘X’ operations. Further, SPICE simulations are performed to evaluate the feasibility of a scaled nvCAP device in a large TCAM array. The low CON/COFF ratio of a scaled device can lead to false-positive matchings, which can be countered by introducing a dummy column and input dependent charge cancellation. Finally, the charge-domain nvCAP TCAM is benchmarked against other proposed candidates, showing a ~1.5× improvement in energy efficiency over FeFET based current domain TCAM, and a ~3.3× improvement compared to resistive random access memory (RRAM) based TCAM.
25 October 2024 in IEEE Transactions on Electron Devices
This work reports the first experimental demonstration of on-chip switched-capacitor (SC) dc–dc voltage converters, where two types of back-end-of-line (BEOL) compatible device components—amorphous oxide semiconductor (AOS) power transistors and high-voltage (HV) superlattice MIM capacitors—were monolithically integrated for 12–6 V conversion with an efficiency of 82.8%. To implement more efficient dual- $\textit{V}_{\text{th}}$ circuit design, both enhancement-and depletion-mode AOS power transistors were developed. Oxygen anneal was performed to enhance transistor reliability, achieving up to a 6.5 $\times$ reduction in threshold voltage shift. For the MIM capacitors, with a dielectric stack composed of Hf $_{\text{0.25}}$ Zr $_{\text{0.75}}$ O $_{\text{2}}$ superlattice laminates and Al $_{\text{2}}$ O $_{\text{3}}$ interlayers, the projected lifetime could exceed 10 years at 120 $^{\circ}$ C and 6 V bias, ensuring long-term reliable operation of the converters. Machine learning (ML)-assisted device modeling and circuit simulation results indicated that 4-interleaved design and 3-D capacitor design could further optimize the converter with the decrease of voltage ripple by $\sim$ 60% and the increase of power density to $>$ 1 W/mm $^{\text{2}}$ . The developed on-chip SC dc–dc converters are a competitive option for implementing efficient vertical power delivery networks (PDNs) in heterogeneous 3-D integrated circuits (ICs).