A conductivity-depth transform (CDT) of airborne transient electromagnetic (EM) data generates approximate sections and maps of the subsurface electrical conductivity variations. The resulting products have instrumentation parameters such as the transmitter waveform removed and can be directly integrated with other information from the survey area. Although approximate, the conductivity depth transform has a number of advantages over an exact inversion method. These are illustrated with two examples: a groundwater salinity study in Australia and a survey over the Bushman mineral deposit in Botswana.
A static electrical method has been developed to determine the electrical resistivity of crustal rock beneath the sea. The transmitter is a vertical, long-wire bipole, extending from the sea surface to the sea floor. A commutated current, generated on the ship, is fed to two large electrodes: one near the sea surface, the other at the end of a long insulated wire. The return path for the current is through the sea and the subjacent crust. The receiver is a self-contained, remote, microprocessor-controlled magnetometer which is deployed from the ship to the sea floor and subsequently recovered. The data are measurements of the azimuthal component of the magnetic field as a function of transmitter-receiver horizontal separation.The acronym MOSES has been coined for the method. The choice of the name MOSES is appropriate because the system geometry is carefully arranged to remove many of the adverse effects of the relatively conductive sea water. In particular, accurate estimates of sea floor resistivity are possible because the data are proportional to the transmitted current from the source into the crustal material.A sea test of the method in a water depth of 640 m was conducted in the "V" shaped Bute Inlet, British Columbia. Transmitted power was 1.25 kW; averaging time at each transmitter location was 1 hour. Transmitter-receiver separations ranged from 150 to 2 000 m. The resistivity and thickness of a sedimentary section beneath the sea were determined as 1.9 Omega .m and 560 m, respectively. The interpretation was accomplished both by matching the data converted to apparent resistivity to corresponding model type curves and by generalized linear inverse theory. Errors in the final parameters were estimated at about 9.2 percent using a parameter eigenvector analysis. The interpreted resistivity is in accord with direct measurement on core samples of sediment porosity. The interpreted thickness is less than an upper limit determined by extrapolating local inlet topography beneath the sea.
Exploration for nickel sulphides has often involved the application of airborne electromagnetic data. Some of the early successes of the technique were in Canada in the 1950s, detecting shallow massive sulphides in highly resistive host stratigraphies. As exploration for deeper deposits under cover proliferates, a comparison of different systems and an analysis of the depth of penetration of these systems is required. An examination of field data from three known nickel sulphide deposits shows that the target anomalies are all above the noise level except where shielded by a flat-lying conductor. Using the geological models for each deposit, forward modelling was applied to determine that the ore bodies chosen for this study could be buried deeper before the system used would cease to be an effective exploration tool. Forward modelling also shows that all methods examined are able to identify the target. Systems with lower base frequency and wider transmitter pulse give the best results.
Airborne electromagnetic (AEM) data are presently inverted with one-dimensional (1D) models, either as Conductivity Depth Images (CDI) or with full non-linear inversion, to build model sections from concatenated 1D models. If lateral conductivity changes are small, 1D models are justified. However, AEM investigations are often carried out specifically to find localized conductors, and in this case, 1D inversion is inadequate and will often produce artefacts in the model section. We have developed an approximate two-dimensional (2D) inversion method that deals with laterally inhomogeneous sections. The method is based on the adaptive Born approximation previously applied by one of the authors (NBC) to the interpretation of central-loop ground EM profiles. The technique produces synthetic models with moderate conductivity contrasts and with some improvement over CDI sections. The computing speed is comparable to that of stitched 1D inversions. An example of processing field data with the approximate 2D inversion method over a massive nickel sulphide deposit shows results that are promising for its routine application on large AEM data sets.
The recent discoveries of polymetallic sulfide deposits on the deep sea floor have created an interest in geophysical techniques for mapping them. A magnetometric resistivity method (MINI-MOSES) has been developed for detecting the distribution of sub-sea-floor electrical resistivity. A vertical, long-wire bipole feeds electric current into the ocean. Some of the current enters the sea floor, and its magnetic field is measured at various distances by a low-frequency induction coil magnetometer. The method is sensitive to conductive and resistive zones at depth, and information about three-dimensional resistivity structures can be obtained. The small load resistance of an electric transmitter grounded in the ocean allows high current to be driven by a battery-powered instrument. The induction coil receiver is more sensitive and less noisy than conventional flux-gate magnetometers over the selected frequency band. This receiver is therefore well-adapted to the almost noise-free deep sea-floor environment. Both the transmitter and the receiver are completely self-contained, recording averaged transmitted and received signals in random access memory. The technique was tested near a sulfide deposit at 47° 57′N, 129°06′W on the axis of the Juan de Fuca Ridge. The deep submersible ALVIN positioned and moved the instruments about on the sea floor. Just enough data were obtained to demonstrate the viability of the technique for this kind of geologic mapping and mineral exploration. The electrical resistivity of 14 Ω · m obtained for a uniform half-space model is consistent with Deep Sea Drilling Project (DSDP) results for the seawater-saturated basalt.