26 September 2022 in IEEE Transactions on Transportation Electrification
Electric motor steer-by-wire for full self-driving vehicles requires precise tracking of angle demand in the process of steering, making steering angle rapid response paramount. This is particularly challenging for steering wheels precisely without handwheel, for which external disturbance information is scarce. While much of the research on steer-by-wire has focused on improving the stability of vehicle dynamics, comparatively little is known about the steering angle demand control of full self-driving vehicles. Here we discuss a series of studies on the electric motor steering that, collectively, design an angle demand control approach of how the particle-swarm backstepping control algorithm steers the front wheels. The designed approach can not only cope with the system uncertainties in the plant model but also obtain the optimized stepping control parameters in backstepping scheme effectively. The developed approach has been downloaded into a steering control unit, and tested in real-world conditions using steering test vehicle to fully realize practical application of electric motor steering.
11 June 2022 in Chinese Journal of Mechanical Engineering
Due to quick response and large quantity of electric motor torque, the traction wheels of battery electric vehicle are easy to slip during the initial phase of starting. In this paper, a sliding mode control approach of acceleration slip regulation is designed to prevent the slip of the traction wheels. The wheel slip ratio is used as the state variable for the formulation of system dynamics model. The fuzzy algorithm is utilized to adjust the switch function of sliding mode controller. After stability and robustness analysis, the sliding mode control law is transferred into C code and downloaded into vehicle control unit, which is validated under wet and dry road conditions. The experimental results with a small overshoot and a quick response during starting indicate that the sliding mode controller has good control effect on the slip ratio regulation. This article proposes an acceleration slip regulation method that improves the safety during acceleration for battery electric vehicle.
20 June 2022 in IEEE Transactions on Intelligent Transportation Systems
Intelligent pedal control is a new development trend of vehicle intelligence, an important application of which is the single pedal control being the driving and braking inputs for energy management of battery electric vehicle. Usually, a constant pedal angle is used as the zero position that is a boundary between the driving and the braking. Based on the dynamic zero position that is a variable pedal angle depicting the direction switch point during pedal rotation, we show a single pedal control approach to operate the driving and the braking of battery electric vehicle, which can make full use of the pedal stroke and improve the control performance. Pedal torque demand is observed by a new pedal dynamics model that depicts the dynamic variation of pedal position. A nonlinear model predictive controller is designed to realize optimal-based energy management, satisfy dynamic demands, improve ride quality, and ensure wheel anti-slip safety. To validate the effect of the single pedal control approach, both simulations and real vehicle tests are carried out. The results illustrate that the energy consumption of single pedal control can be reduced than the dual pedal control in several representative driving cycles benefited from the more efficient use of regenerative braking.
17 January 2025 in IEEE Transactions on Systems, Man, and Cybernetics: Systems
Sliding mode control (SMC) algorithms in engineering applications necessitate the design of a sliding manifold to guide system motion. However, finding the optimal sliding manifold parameter (SMP) may be particularly challenging. While much of the research on SMC has focused on establishing a constant parameter for the sliding manifold, comparatively little is known about using a variable approach. In this article, we propose a predictive sliding control (PSC) algorithm that uses model predictive control (MPC) to determine the optimal SMP. The input to MPC is the SMC law with a sliding manifold variable parameter. In addition, the stability and robustness of the control system are analyzed in detail. The designed predictive sliding controller is applied to angle following of a steer-by-wire system installed on a self-driving vehicle. Experimental results and statistical analysis demonstrate the efficacy of the proposed control algorithm.
29 August 2024 in Asian Journal of Control
1 December 2025 in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
In this article, a position-based proportional-integral observer is developed to estimate the electrical angle, utilizing a reconstructed model within a synchronous rotating coordinate system for permanent magnet synchronous motors. Besides, the stability of proposed sensorless algorithm is proved by Lyapunov function. Some comparative experiments are carried out among the position-based proportional-integral observer, sliding mode observer, and Luenberger observer, which are all used in the field oriented control system. The experiments include a start-up and an acceleration experiment. Based on the experimental findings and statistical analysis, it is evident that the proposed algorithm provides a precise estimation of the electrical angle, making it applicable in engineering application.