16 May 2019 in Materials Horizons
Hybrid perovskites incorporating conjugated organic cations enable unusual charge carrier interactions among organic and inorganic structural components, but are difficult to prepare as films due to disparate component chemical/physical characteristics (e.g., solubility, thermal stability). Here we demonstrate that resonant infrared matrix-assisted pulsed laser evaporation (RIR-MAPLE) mitigates these challenges, enabling facile deposition of lead-halide-based perovskite films incorporating variable-length oligothiophene cations. Density functional theory (DFT) predicts suitable organic and inorganic moieties that form quantum-well-like structures with targeted luminescence or exciton separation/quenching. RIR-MAPLE-deposited films enable confirmation of these predictions by optical measurements, which further display excited state behavior transcending traditional quantum-well models—i.e., with appropriate selection of specially synthesized organic/inorganic moieties, intercomponent carrier transfer efficiently converts excitons from singlet to triplet states in organics for which intersystem crossing cannot ordinarily compete with recombination. These observations demonstrate the uniquely versatile excited-state behavior in hybrid perovskite quantum wells, and the value of integrating DFT, organic synthesis, RIR-MAPLE and spectroscopy for screening/preparing rationally devised complex structures.
5 January 2018 in ACS Energy Letters
ASAdrienne D. Stiff-Roberts
Adrienne D. Stiff-Roberts
27 September 2017 in Journal of Electronic Materials
8 December 2017 in Applied Optics
Yttria-stabilized zirconia (YSZ) is the most widely used material for thermal plasma sprayed thermal barrier coatings (TBCs) used to protect gas turbine engine parts in demanding operation environments. The superior material properties of YSZ coatings are related to their internal porosity level. By quantifying the porosity level, tighter control on the spraying process can be achieved to produce reliable coatings. Currently, destructive measurement methods are widely used to measure the porosity level. In this paper, we describe a novel nondestructive approach that is applicable to classify the porosity level of plasma sprayed YSZ TBCs via Mueller matrix polarimetry. A rotating retarder Mueller matrix polarimeter was used to measure the polarization properties of the plasma sprayed YSZ coatings with different porosity levels. From these measurements, it was determined that a sample’s measured depolarization ratio is dependent on the sample’s surface roughness and porosity level. To this end, we correlate the depolarization ratio with the samples’ surface roughness, as measured by a contact profilometer, as well as the total porosity level, in percentage measured using a micrograph and stereological analysis. With the use of this technique, a full-field and rapid measurement of porosity level can be achieved.
10 September 2020 in Journal of Applied Physics
Resonant infrared, matrix-assisted pulsed laser evaporation (RIR-MAPLE) is a promising technique for the physical vapor deposition of hybrid organic–inorganic perovskites. The approach already has been used to deposit both three-dimensional and two-dimensional hybrid perovskites with material quality comparable to those synthesized by solution processing. However, the phenomenological mechanisms of hybrid perovskite film formation by RIR-MAPLE have not been articulated. Therefore, this work presents a careful investigation of film formation mechanisms of three-dimensional methylammonium lead halide perovskites by considering the temporal evolution of morphology, crystallinity, and optical properties of films deposited by RIR-MAPLE.
14 August 2018 in Optical Engineering
Aircraft coatings are critical for protecting the substrate material from corrosion, and in some cases, serve to reduce the aircraft’s RADAR cross section. A coating system is generally formed from three layers: a topcoat, primer, and substrate. Exposed substrate or primer, from defects in the topcoat, poses an operational hazard to the aircraft and can shorten a component’s lifetime. Conventional computer vision techniques require intensive image processing algorithms to detect such defects across a wide range of observation angles, variations in incident illumination, and nondefect markings. We introduce a polarimetric imaging technique that can classify topcoat defects that penetrate to the primer or substrate versus superficial surface markings. Results demonstrate that circular and linear polarization can discriminate metallic and carbon fiber substrates from the dielectric paint and low observable topcoats. To this end, we demonstrate that the technique of using polarimetric imaging may be viable for in-situ robotic inspection of aircraft topcoats. This is followed by our experimental results, which demonstrate material identification on the single-pixel level.