The Zn2+ substitution on Mg2+ site in the anionic framework (Mg2Sb2)2− of Mg3Sb2 results in an optimal control over the carrier concentration and the reduction in thermal conductivity via mass fluctuation scattering which drives the system to achieve a ZT of 0.37 at 773 K in Mg2.9Zn0.1Sb2.
We study the strain dependence of the magnetic anisotropy of room-temperature ferromagnetic semiconductor () thin films epitaxially grown on different buffer layers, using ferromagnetic resonance measurements. We show that the magnetocrystalline anisotropy in exhibits a dependence on the epitaxial strain and changes its sign from negative (in-plane magnetization easy axis) to positive (perpendicular magnetization easy axis), when the strain is changed from tensile to compressive. Meanwhile, the shape anisotropy () is negative and dominant over . Therefore, the effective magnetic anisotropy is always negative, leading to the in-plane magnetic anisotropy in all the samples. This work demonstrates ferromagnetic resonance and strong shape anisotropy at room temperature in III-V ferromagnetic semiconductors. We also observed very high Curie temperature in -type (Ga,Fe)Sb, which is the highest reported so far in III-V based ferromagnetic semiconductors.
We report switching of magnetic anisotropy (MA) from in-plane to perpendicular with increasing the thickness of a (001)-oriented ferromagnetic-semiconductor (FMS) layer with a high Curie temperature ( K), using ferromagnetic resonance at room temperature. We show that the total MA energy () along the [001] direction changes its sign from positive (in-plane) to negative (perpendicular) with increasing above an effective critical value . We reveal that (Ga,Fe)Sb has twofold symmetry in the film plane. Meanwhile, in the plane perpendicular to the film including the in-plane [110] axis, the twofold symmetry with the easy magnetization axis along [110] changes to fourfold symmetry with the easy magnetization axis along with increasing . This peculiar behavior is different from that of (Ga,Mn)As, in which only the in-plane MA depends on the film thickness and has fourfold symmetry due to its dominant cubic anisotropy along the axes. This work provides an important guide for controlling the easy magnetization axis of high- FMS (Ga,Fe)Sb for room-temperature device applications.
Spin injection using ferromagnetic semiconductors at room temperature is a building block for the realization of spin-functional semiconductor devices. Nevertheless, this has been very challenging due to the lack of reliable room-temperature ferromagnetism in well-known group IV and III-V based semiconductors. Here, we demonstrate room-temperature spin injection by using spin pumping in a BiSb/(Ga,Fe)Sb heterostructure, where (Ga,Fe)Sb is a ferromagnetic semiconductor (FMS) with high Curie temperature (TC) and BiSb is a topological insulator (TI). Despite the very small magnetization of (Ga,Fe)Sb at room temperature (45 emu/cc), we detected spin injection from (Ga,Fe)Sb by utilizing the large inverse spin Hall effect (ISHE) in BiSb. Our study provides the first demonstration of spin injection at room temperature from a FMS.
Topological crystalline insulator SnTe is a promising material for future spintronics applications because of the strong spin-orbit coupling and surface states protected by the mirror symmetry of the crystal. In this paper, using a high-quality epitaxial (001)-oriented Fe/SnTe/CdTe/ZnTe heterostructure grown on GaAs, we successfully observe the inverse spin Hall effect in SnTe induced by spin pumping, which is confirmed by detailed analyses of the dependence of the electromotive force on the microwave power, magnetic-field angle, and temperature. By a rough estimation, a relatively large spin Hall angle of ∼0.01 is obtained for bulk SnTe at room temperature. This large value may be partially caused by the surface states. Our result suggests that SnTe can be used for efficient spin-charge current conversion.
We study the temperature dependence of magnetic anisotropy (MA) of ferromagnetic semiconductor (Ga0.7,Fe0.3)Sb thin films with thicknesses of 20 nm and 40 nm using ferromagnetic resonance. With decreasing temperature from 300 to 10 K, the easy magnetization axis of the 40-nm-thick film changes from in-plane to perpendicular at 250 K, while that of the 20-nm-thick film lies in the film plane at all measurement temperatures (10–300 K). In the 40-nm-thick film, the uniaxial perpendicular anisotropy (K2⊥) significantly increases with decreasing temperature and surpasses the thin-film shape anisotropy, leading to perpendicular magnetic anisotropy (PMA). We present a possible scenario that the increase in K2⊥ originates from the formation of the Fe-rich nanocolumns with the perpendicular shape anisotropy, which induces the PMA in the whole film at low temperatures due to carrier-mediated exchange interactions between Fe spin in the Fe-rich nanocolumns and Fe spin in the (Ga,Fe)Sb matrix. Our findings on the temperature dependence of MA of heavily Fe-doped (Ga,Fe)Sb provide insights into the mechanism of high-Curie-temperature ferromagnetism.