21 November 2003 in Medical Physics
11 January 2003 in Transport Theory and Statistical Physics
1 September 2013 in Nuclear Technology
Using experimental data published in the International Handbook of Evaluated Reactor Physics Benchmark Experiments for the fresh cold core of the High Temperature Engineering Test Reactor, a comprehensive validation study has been carried out to assess the performance of the SCALE code system for analysis of high-temperature gas-cooled reactor configurations. This paper describes part of the results of that effort. The studies performed included criticality evaluations for the full core and for the annular cores realized during the fuel loading, as well as calculations and comparisons for excess reactivity, shutdown margin, control rod worths, temperature coefficient of reactivity, and reaction rate distributions. Comparisons of the SCALE results with both experimental values and MCNP-calculated values are presented. The comparisons show that the SCALE calculated results, obtained with both multigroup and continuous energy cross sections, are in reasonable agreement with the experimental data and the MCNP...
1 February 1997 in Nuclear Technology
A typical advanced boiling water reactor (BWR) pin cell configuration is used to develop numerical benchmarks for the effects of moderator and fuel properties on the eigenvalue. Results are developed for pin cell configurations with different moderator densities and temperatures and different fuel exposures and temperatures. These configurations (98) correspond to those typical of cold, hot-operating, and transient conditions in B WRs. All of the calculations were performed using the Monte Carlo code MCNP with the continuous-energy cross sections derived from version VI of the Evaluated Nuclear Data Files ENDF/B.
1 September 2013 in Nuclear Technology
The Advanced High-Temperature Reactor (AHTR) is a 3400-MW(thermal) fluoride salt-cooled high-temperature reactor that uses coated particle fuel compacted into slabs rather than spherical or cylindrical fuel compacts. Simplified methods are required for parametric design studies to perform burnup analysis on the entire feasible design space. These simplifications include fuel homogenization techniques to increase the speed of neutron transport calculations and equilibrium depletion analysis methods to analyze systems with multibatch fuel management schemes.This paper presents three elements of significant novelty. First, the reactivity-equivalent physical transformation (RPT) methodology usually applied in systems with cylindrical and spherical geometries has been extended to slab geometries. Second, implementing this RPT homogenization, a Monte Carlo-based depletion methodology was developed to search for the maximum discharge burnup in a multibatch system by iteratively estimating the beginning of equili...