Lead-based mixed perovskite materials have emerged in the last couple of years as promising photovoltaic materials. Recently, it was shown that improved material stability can be achieved by incorporating small amounts of inorganic cations (Cs+ and Rb+), partially replacing the more common organic cations (e.g., methylammonium, MA, and formamidinium, FA). Especially, a mixed cation composition containing Rb+, Cs+, MA+, and FA+ was recently shown to have beneficial optoelectronic properties and was stable at elevated temperature. This work focuses on the composition of this material using synchrotron-based photoelectron spectroscopy. Different probing depths were considered by changing the photon energy of the X-ray source providing insights on the chemical composition and the chemical distribution near the surface of the samples. Perovskite materials containing two, three, or four monovalent cations were analyzed and compared. The presence of Cs and Rb was observed both at the sample surface and toward the bulk, and we found that in the presence of three or four cations, less unreacted PbI2 remains in the sample. Interestingly, Rb and Cs appear to act jointly resulting in a different cation depth profile compared to that of the triple counterparts. Our findings provide significant understanding of the intricate depth-dependent chemical composition in perovskite materials using the common practice of cation mixing.
20 January 2020 in ACS Applied Materials & Interfaces
Lead halide perovskite solar cells have significantly increased in both efficiency and stability over the last decade. An important aspect for their long-term stability are the reactions between the perovskite and other materials in the solar cell. This includes the contact materials and their degradation if they can potentially come into contact through e.g. pinholes or material diffusion and migration. Here, we explore the interactions of silver contacts with lead halide perovskites of different compositions by using a model system where thermally evaporated silver was deposited directly on the surface of the perovskites. Using X-ray photoelectron spectroscopy with support from scanning electron microscopy, X-ray diffraction and UV-visible absorption spectroscopy, we studied the film formation and degradation of silver on perovskites with different compositions. The deposited silver does not form a continuous silver film but instead tends to form particles on a bare perovskite surface. These particles are initially metallic in character but degrade into AgI and AgBr over time. The degradation and migration appear unaffected by the replacement of methylammonium with caesium but is significantly slowed by the complete replacement of iodide with bromide. The direct contact between silver and the perovskite also significantly accelerates the degradation of the perovskite, with a significant loss of organic cations and the possible formation of PbO, and, at the same time, changed surface morphology of the iodide-rich perovskite interface. Our results further indicate that an important degradation pathway occurred through gas phase perovskite degradation products. This highlights the importance of control over the interface materials and the use of completely hermetical barrier layers for the long-term stability and therefore the commercial viability of silver electrodes.
Further understanding and optimization of dye solar cells towards stable and efficient devices necessitate implementation of the characterization techniques.