3 May 2010 in IEEE Transactions on Biomedical Engineering
Ongoing brain activity can be recorded as electroen-cephalograph (EEG) to discover the links between emotional states and brain activity. This study applied machine-learning algorithms to categorize EEG dynamics according to subject self-reported emotional states during music listening. A framework was proposed to optimize EEG-based emotion recognition by systematically 1) seeking emotion-specific EEG features and 2) exploring the efficacy of the classifiers. Support vector machine was employed to classify four emotional states (joy, anger, sadness, and pleasure) and obtained an averaged classification accuracy of 82.29% ± 3.06% across 26 subjects. Further, this study identified 30 subject-independent features that were most relevant to emotional processing across subjects and explored the feasibility of using fewer electrodes to characterize the EEG dynamics during music listening. The identified features were primarily derived from electrodes placed near the frontal and the parietal lobes, consistent with many of the findings in the literature. This study might lead to a practical system for noninvasive assessment of the emotional states in practical or clinical applications.
14 March 2005 in IEEE Transactions on Antennas and Propagation
A novel planar tapered-slot-fed annular slot antenna is proposed in this paper. The antenna utilizes a unique tapered-slot feeding structure and simultaneously possesses ultrawide bandwidth, almost uniform radiation patterns, and low profile. It is, hence, adequate for ultrawide-band (UWB) applications. By means of a normalized antenna transfer function, both frequency domain and time domain characteristics of the antenna are carefully investigated. Two measures, the uniformity related to the radiation patterns and the fidelity associated with the transient behaviors, are used to quantitatively describe the performance of an antenna over such an ultrawide bandwidth. Effects of varying the antenna's geometric parameters on the performance are then investigated. Finally, the influence of minimizing the antenna dimension is discussed at the end of the paper.
1 January 1997 in IEEE Transactions on Antennas and Propagation
1 August 1996 in IEEE Transactions on Vehicular Technology
We propose a deterministic approach to model the radio propagation channels in tunnels with and without traffic. This technique applies the modified shooting and bouncing ray (SBR) method to find equivalent sources (images) in each launched ray tube and sums the receiving complex amplitude contributed by all images coherently. In addition, the vector effective antenna height (VEH) is introduced to consider the polarization-coupling effect resulting from the shape of the tunnels. We verify this approach by comparing the numerical results in two canonical examples where closed-form solutions exist. The good agreement indicates that our method can provide a good approximation of high-frequency radio propagation inside tunnels where reflection is dominant. We show that the propagation loss in tunnels can vary considerably according to the tunnel shapes and the traffic inside them. From the results we also find a "focusing" effect, which makes the power received in an arched tunnel higher than that in a rectangular tunnel. Besides, the deep fading that appears in a rectangular tunnel is absent in an arched tunnel. The major effect of the traffic is observed to be the fast fading due to the reflection/obstruction of vehicles. Additional considerations, such as time delay, wall roughness, and wedge diffraction of radio wave propagation in tunnels are left for future studies.
3 September 2008 in IEEE Transactions on Antennas and Propagation
In this paper a compact switched-beam antenna is proposed. The antenna is composed of a four-element antenna array based on L-shaped quarter-wavelength slot antenna elements. Such an antenna element is a planar structure and presents a directional radiation pattern in the azimuth plane. Its maximum radiation direction is toward near the direction of the open end of the slot. As a result, the open ends of the four slot antennas are arranged toward 0, pi/2, pi, and 3pi/2 , respectively. The statuses of these antennas are controlled by some diodes. Consequently, by carefully controlling the diodes, an antenna with several switchable patterns can be achieved. To prove the concept, a 2.4-2.5 GHz switched-beam antenna for WLAN applications is designed and implemented. Its size is 52 mm in square. The antenna possesses eight directional patterns and many nearly omnidirectional patterns in the azimuth plane. The experiment results fully demonstrate the performance of the proposed design. The envelope correlations and the characteristics of the designed antenna are also discussed. Due to the compact size and low manufacture cost, such a design can be a promising solution for digital home applications to overcome multipath problems and increase the transmission data rate.