Humans are always exposed during their lives to ionizing radiation arising outside and within the earth. The exposure to these radiation occurs from natural sources such as radioactive elements in rocks and soil, internal exposure form radioactive elements through water, food and air and cosmic rays entering from outer space to earth's atmosphere. About 87% of the radiation dose received by human beings is due to natural radiation, it is essential to assess the radiation doses in order to control possible health effects from such natural sources. In this regard, a number of articles have been appeared for Malaysia in international research journals, which have been reviewed and complied in this article. Most of these articles are about the measurement of activity concentrations of primordial (238U, 232Th, 226Ra and 40K) and anthropogenic (137Cs) radionuclide's and gamma dose rate in environmental samples using HPGe and NaI (Tl) survey meter
1 April 2015 in Journal of Radiation Research and Applied Sciences
Various sorbents have been used to remove arsenic from contaminated water which is one of the most toxic elements for mankind. In this review, concentration has been focused on the removal of arsenic from aqueous medium using natural, non-toxic, biodegradable and eco-friendly polymeric materials. Therefore, chitosan has been selected one of the most appropriate biopolymer to remove heavy metals form contaminated water particularly arsenic. The use of chitosan in grafting, blending, doping and biocomposite formulations with polymeric and/or activated inorganic materials have gained much attention. This review provides the relevant literature on the applications of polymeric biocomposites for removal of arsenic from aqueous medium. However, the literature survey reveals that very limited attention has been focused on the applications of biocomposites for the removal of arsenic in the past. The sorption capacities of sorbents and LD50 of the arsenic compounds have been compiled
1 February 2014 in American Journal of Applied Sciences
Visible light driven metals (Gd and Tl) doped TiO2 nanoparticles (NPs) were prepared using low cost and facile liquid impregnation method. The prepared NPs were characterized using XRD, SEM/EDX, BET surface area analysis, particle size distribution analyzer, UV–Vis DRS and pH of point of zero charge (pHPZC) analyses. The crystalline phases observed were purely anatase with the particles size ranged between 24 and 30 nm possessing large surface area (74 m2/g) and pore size (12 nm). The reductions in the band gap energy for both the dopant systems were observed and absorption edges were extended to the visible region. The prepared NPs exhibited good photo-induced adsorption affinity for the As(III) from aqueous solution under natural pH of As(III) solution, ambient temperature and normal household compact fluorescent light. The metals-doped NPs showed high removal efficiency (up to 99%) towards As(III) compared to pure TiO2 NPs (68%). In addition, the glass beads immobilized photocatalyst not only enhanced the efficiencies by increasing the active surface area of NPs, but also overcome the post-reaction separation steps. The regeneration study indicated that the physical regeneration is more significant for the reutilization of photocatalysts.