This paper deals with investigations of rotational molding of LLDPE – Fumed Silica (FS) nano composites. The investigations were conducted at an industrial scale using a three arm biaxial rotational molding machine by carefully monitoring the Internal Air Temperature (IAT) within the mold. The effect of 4% FS on powder flow quality (dry flow and bulk density), melt flow quality (Melt Flow Index (MFI), static mechanical properties (tensile strength, modulus, toughness, flexural strength and impact strength) as well as dynamic mechanical properties (storage and loss modulus), along with creep and relaxation were investigated. Morphological studies were conducted to correlate the above findings with the dispersion of the nano particles within the LLDPE matrix.
Owing to its promising physical, chemical, and optical properties, glass is the most widely used material in sophisticated micro-electro-mechanical systems (MEMS) devices. These devices are finding large number of applications in the fields of medical electronics, biotechnology, energy, automobiles, aerospace, etc. While manufacturing MEMS devices, micro-holes are needed to be produced in glass with high levels of accuracy. Micro-drilling in glass using the electrochemical discharge drilling (ECDD) method is an emerging technique. Enhancing the material removal rate (MRR) and lowering the entrance hole overcut in ECDD are the major challenges during this process. To address this problem, significant attention is focused on blending two or more techniques known as hybridized methods to improve the quality of the ECDD process. In the present study, a combination of magnetic flux density (MFD) and high-speed tool rotation was employed during the ECDD process for the glass. Additionally, the effect of the process variable viz. the voltage, tool rotation speed, and feed rate of the MFD around the workpiece was analyzed. Finite element analysis was employed to obtain the optimal MFD over the workpiece. For different voltages, tool rotation speeds, and feed rates; the performance analysis of MRR and entrance hole overcut were compared in the absence and presence of magnetic field-assisted high-speed ECDD.