The HfO2–Ta2O5 system was investigated using two distinct methods: the equilibration method at temperatures ranging from 1 573 to 1 873 K and the differential thermal analysis method up to 2 473 K. To identify the phases, X‐ray diffraction (XRD) and scanning electron microscopy with energy‐dispersive X‐ray spectroscopy (SEM/EDX) were employed. The temperature of the eutectic reaction L→Hf6Ta2O17+Ta2O5 was measured to be 2 052 K and the eutectic composition to be 66.7 mol.% Ta2O5. The peritectic reaction L+HfO2→Hf6Ta2O17 was observed at a temperature of 2 287 K. The heat capacity of the Hf6Ta2O17 phase was measured using differential scanning calorimetry from 240 to 1 300K. The thermodynamic database for the HfO2–Ta2O5 system was derived.
30 June 2025 in Journal of the American Ceramic Society
The interaction behavior between iron oxide‐bearing slags and carbon‐bonded MgO refractory (MgO‐C) containing calcium magnesium aluminate (CMA) was investigated at 1400°C, 1500°C, and 1600°C. After the iron oxide was reduced by the carbon from the MgO‐C refractory, a significant amount of MgO and metallic iron was observed to precipitate and disperse in the bulk of slag. During the iron oxide reduction process, the penetrative ability varied throughout the whole process, attributed to the effect of iron oxide on the thermophysical properties of the molten slag. No reduced iron was detected on the side of MgO‐C, which implies the slag penetration was primarily conducted after the iron oxide was reduced in the slag. Spinel was found to be predominantly formed during the interaction between MgO‐C refractory bearing CMA additive and slags, which strongly hindered further refractory corrosion. Additionally, the Ca 3 Al 4 MgO 10 phase is predicted via ThermoCalc and XRD.