Anthony G. Sheard

Anthony G. Sheard

Auto-generated profile, based on publicly available information

Anthony G. Sheard

Fläkt Woods Limited, Axial Way, Colchester, Essex CO4 5ZD, UK

Research Focus & Metrics

Academic Career Length

16Years (2011-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 August 2011 in International Journal of Rotating Machinery
Verified
Journal Article
Open access
PDF file
ASA. G. Sheard
A. G. Sheard
This paper describes a capacitance-based tip clearance measurement system which engineers have used in the most demanding turbine test applications. The capacitance probe has survived extended use in a major European gas turbine manufacturer's high-temperature demonstrator unit, where it functioned reliably at a turbine entry temperature in excess of 1800 degrees Kelvin. This paper explores blade by blade tip clearance measurement techniques and examines probe performance under laboratory conditions in support of high-temperature installations. The paper outlines the blade by blade tip clearance measurement technique and describes the experimental facility used to study tip clearance measurement. The paper also fully describes the method used to calibrate the measurement system in order to ascertain measurement accuracy. The paper clarifies how the practical problems were overcome associated with making blade by blade tip clearance measurements in both compressor and turbine environments. Since its initial development, gas turbine development programmes have routinely used the clearance measurement system. The inherent robustness of the system has resulted in reliable in-service measurement of clearance in real world applications.

5 June 2013 in Journal of Fluids Engineering
Verified
Journal Article
Closed access
PDF file
Alessandro CorsiniAlessandro Corsini
Alessandro Corsini
FRFranco Rispoli
Franco Rispoli
ASAnthony G. Sheard
Anthony G. Sheard
Paolo VenturiniPaolo Venturini
Paolo Venturini
Induced draft fans extract coal-fired boiler exhaust gases in the form of a two-phase flow with a dispersed solid phase made of unburnt coal and fly ash; consequently fan blades are subject to erosion causing material wear at the leading edge, trailing edge, and blade surface. Erosion results in blade material loss, a reduction of blade chord, and effective camber that together degrade aerodynamic performance. This paper presents a numerical study of the erosive process in an induced draft fan carried out by simulating the particle laden flow using an original finite element Eulerian-Lagrangian solver. The particle trajectories are calculated using a particle cloud tracking technique that considers drifting near wall and an algebraic erosion model. The numerical study clarifies the influence of fan operation to the determination of the erosion regimes and patterns. In particular, the study investigates the role played by the size and mass distribution of the particles by considering a real composition of the flying ashes in the exhaust flow from a coal-fired boiler. The results illustrate the critical blade areas and erosion rates as given by the particle dynamics of different sizes. A specific analysis of the material wear at the blade leading edge is also given.

17 April 2013 in Journal of Fluids Engineering
Verified
Journal Article
Closed access
PDF file
Domenico BorelloDomenico Borello
Domenico Borello
Alessandro CorsiniAlessandro Corsini
Alessandro Corsini
GDGiovanni Delibra
Giovanni Delibra
MFMario Fiorito
Mario Fiorito
ASAnthony G. Sheard
Anthony G. Sheard
In this paper we discuss a computational method focused on the prediction of unsteady aerodynamics, adequate for industrial turbomachinery. Here we focus on a single rotor device selected from a new family of large tunnel ventilation axial flow fans. The flow field in the fan was simulated using the open source code OpenFOAM, with a large-eddy simulation (LES) approach. The sub-grid scale (SGS) closure relied on a one-equation model, that requires us to solve a differential transport equation for the modeled SGS turbulent kinetic energy. The use of such closure was here considered as a remedial strategy in LES of high-Reynolds industrial flows, being able to tackle the otherwise insufficient resolution of turbulence spectrum. The results show that LES of the fan allows to predict the pressure rise capability of the fan and to reproduce the most relevant flow features, such as three-dimensional separation and secondary flows.

11 December 2012 in Advances in Acoustics and Vibration
Verified
Journal Article
Open access
PDF file
ASA. G. Sheard
A. G. Sheard
KDK. Daneshkhah
K. Daneshkhah
Tunnel ventilation fans, classically, must have the ability to both supply and extract air from a tunnel system, with the operator's choice dependent on the tunnel ventilation system's operating mode most appropriate at any given point in time. Consequently, tunnel ventilation fans must incorporate a reversible aerodynamic design which limits the maximum fan pressure rise. This paper presents three high pressure reversible fan concepts. These comprise a two-stage counter rotating fan, a single-stage high speed fan, and a two-stage fan with a single motor and impeller on each end of the motor shaft. The authors consider the relative merits of each concept. The third concept offers the most compact fan, transform, silencer, and damper package size. The authors discuss the mechanical design challenges that occur with a two-stage fan with a single motor and impeller on each end of the motor shaft. They present and consider a selected motor bearing arrangement and casing design for maintainability. Finally, the authors present both prototype fan and full-scale package aerodynamic and acoustic performance, before discussing the challenges presented by high temperature certification in accordance with the requirements of EN 12101-3: 2012.

15 May 2012 in ISRN Mechanical Engineering
Verified
Journal Article
Open access
SBS. Bianchi
S. Bianchi
Alessandro CorsiniAlessandro Corsini
Alessandro Corsini
ASA. G. Sheard
A. G. Sheard
The authors investigate the far-field noise emissions of a datum fan blade fitted with tip end-plate geometries, originally designed to control the leakage vortex swirl level. The end-plate geometries influence the tip-leakage flow, vortex formation, and swirl level. In doing so, the end-plate geometries influence the sound-power levels. After an evaluation of fan rotors' aerodynamic performance, the study compares the rotors' far-field noise signature characterised in terms of sound-power and pressure-level spectra to enable and assess the end-plate acoustic pay-off. The investigation attempts to establish a cause-and-effect relationship between the tip-flow dynamics and the radiated sound fields, exploring the diverse directivity patterns. The authors found a tonal reduction, due to the enhanced blade-tip end-plates and clarified the relevance of the tip features influencing the radial distribution of the noise sources using coherence analysis. The modified multiple-vortex breakdown end-plate design was effective in reducing the broadband noise, giving an improvement in the frequency range of the turbulent noise.

25 December 2012 in Advances in Acoustics and Vibration
Verified
Journal Article
Open access
PDF file
ASA. G. Sheard
A. G. Sheard
This paper describes research involving an in-service failure of a “variable pitch in motion” fan’s blade bearing. Variable pitch in motion fans rotate at a constant speed, with the changing blade angle varying the load. A pitch-change mechanism facilitates the change in blade angle. A blade bearing supports each blade enabling it to rotate. The author observed that as the fan aerodynamic stage loading progressively increased, so did the rate of blade-bearing wear. The reported research addressed two separate, but linked, needs. First, the ongoing need to increase fan pressure development capability required an increase in fan loading. This increase was within the context of an erosive operating regime which systematically reduced fan pressure development capability. The second need was to identify the root cause of blade-bearing failures. The author addressed the linked needs using a computational analysis, improving the rotor inflow aerodynamic characteristics through an analysis of the inlet box and design of inlet guide vanes to control flow nonuniformities at the fan inlet. The results of the improvement facilitated both an increase in fan-pressure-developing capability and identification of the root cause of the blade-bearing failures.