$^{117m}$Sn is one of the radioisotopes can be beneficially produced through alpha particle irradiation. The targets were prepared by deposition of $^{116}$Cd metal onto high purity 12 $\mu$m thick Cu backing. The average deposited thickness was 21.9 $\mu$m. The beam energy was thoroughly measured by Time of Flight (TOF) methods and proved to be 51.2 MeV. For the experiment the well-established stacked foil technique was used. In addition to the Cd targets, Ti foils were also inserted into the stacks for energy and intensity monitoring. The Cu backings were also used for monitoring and as recoil catcher of the reaction products from the cadmium layer. The activities of the irradiated foils were measured with HPGe detector for gamma-ray spectrometry and cross section values were determined. As a result excitation functions for the formation of $^{117m}$Sn, $^{117m,g}$In, $^{116m}$In, $^{115m}$In and $^{115m,g}$Cd from enriched $^{116}$Cd were deduced and compared with the available literature data and with the results of the nuclear reaction model code calculations EMPIRE 3.2 and TALYS 1.8. Yield curves were also deduced for the measured nuclear reactions and compared with the literature
The excitation functions of deuteron-induced reactions on 169Tm were measured using the stacked-foil method and high resolution gamma-ray spectrometry. The production cross sections of a medical radionuclide 169Yb were investigated. The result was compared with the previous experiments and found to be in good agreement. In addition to 169Yb, the production cross sections of Tm isotopes, 170Tm, 168Tm and 167Tm, were measured. These results were compared with the TALYS calculations taken from the TENDL-2015 online data library.