Hui Wang

Hui Wang

Auto-generated profile, based on publicly available information

Hui Wang

STFC Rutherford Appleton Laboratory, RAL Space, Didcot, U.K.

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
7 December 2017 in IEEE Transactions on Terahertz Science and Technology
Verified
Journal Article
Open access
HYHao Yang
Hao Yang
YDYuvaraj Dhayalan
Yuvaraj Dhayalan
XSXiaobang Shang
Xiaobang Shang
MLMichael J. Lancaster
Michael J. Lancaster
Bo LiuBo Liu
Bo Liu
PHPeter G. Huggard
Peter G. Huggard
This paper presents two WR-3 band (220–325 GHz) filters, one fabricated in metal using high precision computer numerically controlled milling and the other made with metallized SU-8 photoresist technology. Both are based on three coupled resonators, and are designed for a 287.3–295.9-GHz passband, and a 30-dB rejection between 317.7 and 325.9 GHz. The first filter is an extracted pole filter coupled by irises, and is precision milled using the split-block approach. The second filter is composed of three silver-coated SU-8 layers, each 432 μm thick. The filter structures are specially chosen to take advantage of the fabrication processes. When fabrication tolerances are accounted for, very good agreement between measurements and simulations are obtained, with median passband insertion losses of 0.41 and 0.45 dB for the metal and SU-8 devices, respectively. These two filters are potential replacements of frequency selective surface filters used in heterodyne radiometers for unwanted sideband rejection.

1 June 2018 in IEEE Transactions on Terahertz Science and Technology
Verified
Journal Article
Open access
Cheng GuoCheng Guo
Cheng Guo
XSXiaobang Shang
Xiaobang Shang
MLMichael J. Lancaster
Michael J. Lancaster
JXJun Xu
Jun Xu
JPJeffrey Powell
Jeffrey Powell
PHPeter G. Huggard
Peter G. Huggard
A 290-310 GHz Schottky diode based sub-harmonic mixer with integrated, low loss, impedance matching waveguide cavity filters is presented in this paper. This mixer was designed for use in a 300 GHz communication system with a 20 GHz intermediate frequency (IF) band centred at 15 GHz. Image rejection of the 260-280 GHz lower sideband (LSB), as well as impedance matching, was achieved using an integrated 3rd order filter in the RF waveguide. The conventional coupling matrix was used to design the filter even though the impedance presented to the RF port was complex and frequency dependent. The mixer was measured to have: (1) Single sideband (SSB) conversion loss of 9-10 dB across the upper sideband (USB), with a mixer noise temperature of 2000-2600 K. (2) A return loss at the RF port better than 12 dB, with three filter reflection zeroes (poles) distinguishable. (3) A sideband rejection ratio (SBR) from 13 to 25 dB, demonstrating the RF filter's excellent performance in terms of impedance matching and filtering.

17 February 2022 in Geophysical Research Letters
Verified
Journal Article
Open access
PDF file
BCBenjamin M. Courtier
Benjamin M. Courtier
BABattaglia Alessandro
Battaglia Alessandro
PHPeter G. Huggard
Peter G. Huggard
CWChris Westbrook
Chris Westbrook
KMKamil Mroz
Kamil Mroz
RWRichard J. Wylde
Richard J. Wylde
The first Doppler spectra ever acquired by an atmospheric radar at 200 GHz (G‐band) are presented. The observations were taken during a light precipitation event in May (rain rates <2 mm hr−1) at Chilbolton Observatory, UK, with coincident Ka‐band and W‐band Doppler radar measurements. The collected rain spectra agree with Mie theory predictions: at G‐band they show significant reductions in the spectral power return—as compared to theoretical Rayleigh scattering—corresponding to high Doppler velocities (i.e., large raindrops) with the presence of multiple peaks and “Mie notches” in correspondence to the maxima and minima of the raindrop backscattering cross sections. The first two G‐band Mie troughs correspond to smaller velocities/sizes than the first W‐band Mie notch. These features offered by G‐band radars pave the way toward applying, in rain, Mie notch vertical wind retrievals and multifrequency drop size distribution microphysical retrievals to smaller rain rates and smaller characteristic sizes than ever before.

31 January 2022 in IEEE Transactions on Terahertz Science and Technology
Verified
Journal Article
Closed access
TSTalal Skaik
Talal Skaik
YWYi Wang
Yi Wang
MSMilan Salek
Milan Salek
PHPeter Hunyor
Peter Hunyor
HWHui Wang
Hui Wang
RMRafael Martinez
Rafael Martinez
This article explored the use of high-precision metal three-dimensional printing in subterahertz waveguide devices and demonstrated a 300 GHz waveguide bandpass filter made by micro laser sintering (MLS) process. The filter structure is composed of five rectangular waveguide cavities (fundamental TE 101 mode), two back-to-back right-angle bends and WR-03 waveguide sections. It is made of two identical blocks of stainless steel and two brass plates were used to clamp them together and achieve secure contact in the E plane cut. The measured response of the as fabricated stainless-steel filter showed minimum passband insertion loss of 4.7 dB due to the degraded effective conductivity of the stainless steel and surface roughness. To reduce the insertion loss, the filter was gold plated using an electro-less process with nickel undercoat layer. Plating the filter significantly improved the passband insertion loss, measured to be between 1.1 and 2.7 dB. Inspection of the filter using an Alicona optical system showed that dimensional accuracy within ± 15 μm on average has been achieved by the MLS printer. The investigative study tested the boundary of the technology in subterahertz device applications.

6 February 2023 in IEEE Transactions on Components, Packaging and Manufacturing Technology
Verified
Journal Article
Closed access
TSTalal Skaik
Talal Skaik
MSMilan Salek
Milan Salek
PHPeter Hunyor
Peter Hunyor
HWHui Wang
Hui Wang
PHPeter G. Huggard
Peter G. Huggard
YWYi Wang
Yi Wang
This paper presents a comprehensive evaluation of 3D-printed monolithic waveguide components fabricated by a high-precision micro laser sintering (MLS) process. The investigated devices are two 180 GHz bandpass filters and a straight G-band (140-220 GHz) waveguide section. All were made of stainless steel, which was later gold coated using an electroless process. One of the filter samples was characterized using X-ray micro-CT to inspect the printing quality as well as measure the internal dimensions. The sample was then sectioned to allow measurement of the surface roughness of the inner surfaces and inspect the gold coating quality. The as-manufactured stainless steel components showed high insertion losses: over 3 dB in the filter passbands and between 4.7 dB and 7 dB for the waveguide section, increasing with frequency over the G-band. This loss is due to the electrical conductivity of stainless steel as well as the surface roughness. Gold plating significantly reduced the insertion losses, to 0.5 dB for the filters and to between 0.6 dB and 1 dB for the waveguide section. The investigative study showed the high dimensional accuracy and good printing quality achieved by MLS, demonstrating the value of the technique in producing monolithic metal waveguide components with fine geometrics.

27 December 2019 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Open access
Cheng GuoCheng Guo
Cheng Guo
YDYuvaraj Dhayalan
Yuvaraj Dhayalan
XSXiaobang Shang
Xiaobang Shang
JPJeffrey Powell
Jeffrey Powell
MLMichael J. Lancaster
Michael J. Lancaster
PHPeter G. Huggard
Peter G. Huggard
This article presents a 135-150-GHz Schottky diode-based bias-less frequency tripler based on SU-8 micromachined WR-5 waveguides. The waveguides consist of five 432-μm-thick silver-plated SU-8 layers, which house the diode chip and form the output matching network. The input matching circuit is realized in a computer numerical control (CNC) milled waveguide filter, which also provides support and thermal sink to the SU-8 waveguides. Considering the low thermal conductivity of the SU-8 material, auxiliary metallic thermal paths are designed, and the impact of these is discussed through thermal modeling. The thermal simulations show that under 50-mW power dissipation in the diode anodes, the maximum temperature of the SU-8 tripler is predicted to be 346 K at the diode junction, only 7 K higher than in an entirely metal equivalent. The tripler was measured to have a conversion loss of 16-18 dB and the input return loss is better than 18 dB. This work demonstrates that SU-8 micromachined waveguides can be used to package high-frequency semiconductor components, which, like other photolithography-based processes such as silicon deep reactive ion etching (Si-DRIE), has the potential for submicrometer feature resolution.