3 November 2022 in Textile Research Journal
As a robot end-effector, the soft gripper shows good flexibility and adaptability in the process of grasping the fabric, which provides a new solution for garment production automation. In this article, a soft gripper like a high-heeled shoe was proposed which can separate the fabric layer by layer with high effectiveness. First, by observing the action of human hands grasping fabric, a soft gripper with a fixed finger and a movable finger was designed. Then, the structural parameters, such as the height difference between the fixed finger and the movable finger, the finger’s opening width, and the thickness of cavity of the designed soft finger are determined through force analysis and finite-element analysis. Further, a method was proposed to evaluate the positioning precision after the transportation of cutting pieces. Finally, soft grippers with three different parameters were made by three-dimensional printing to test their performance in grasping fabrics, and the accuracy of separating pieces of fabric layer by layer and the precision of positioning the fabric were tested, respectively. The results show that when the soft gripper with d = 1 mm is used to grasp different fabrics, the accuracy of layer-by-layer separation is above 90%. After the gripper is opened and the fabric is released, the positioning precision of most fabrics gets a tolerance of ±1 mm. Experimental results show that the soft gripper designed in this paper can behave like human hands to operate the motion of grasping fabrics in the manufacturing of garments.
31 July 2018 in Textile Research Journal
This paper focuses on a new method to classify and convert the lower-body features of young females into the rules of individualized elements that are necessary for pant pattern design. Approaches used to develop a customized apparel pattern and their advantages and disadvantages are discussed in the literature review. Subsequently, a new method to analyze lower-body features for the development of individualized pant patterns is presented. The main method involved is the classification of certain body features into grades that provided alternatives for different body shapes, and the use of elements that are needed for pattern-making but that are difficult to measure directly in a three-dimensional image to predict the girths, half-girths and the other key measurements of a body. Three sets of rules were derived from this method: (a) individualized rules on height to classify the height at a feature into different grades, which help to find the location of the feature based on the height of a body; (b) individualized rules on girth to sort the thickness/width ratio of different cross-sections into grades at different features, which predict the girth of a characteristic feature from the thickness and the width of a feature; and (c) individualized rules on the crotch to find the relationship between the length of the measuring line at the divided points and the thickness of a certain girth, which reveal the individuality of the crotch and benefit the development of an individualized pant pattern. The method presented has the potential to realize individuality in female pant design by converting lower-body features into grades and establishing relationships with personalized parameters. This method can reduce the complexity of customization in pattern design.
30 December 2018 in Textile Research Journal
This study proposed a method on how to obtain and predict body measurements from frontal and side images of a subject for the individualized pattern generation of women's pants. According to the relationship between front and back patterns and a body torso, 32 important pattern dimensions relevant to certain body dimensions were determined by the graphic flattening method. For the body dimensions (such as perimeters) that could not be directly extracted from the body images, the prediction models were established based on the available width and depth measurements. The body measurements from the body images of 425 subjects were compared with the corresponding manual measurements, which showed a good correlation between the automated and manual measurements. The tried-on test showed that the pants made with the generated patterns demonstrated good fitting effect at the important characteristic landmarks of a participating subject. This method can accelerate the pattern-making process for women's pants based on body measurements, reducing human efforts, costs and production time.
21 January 2021 in Textile Research Journal
In order to progress the research on automatic separation of fabric pieces from a cutting pile during the garment manufacture, a summary of the methods of grasping was made. Next, the process of cut garment pieces grasping by soft fingers was defined, and the mechanical model was analyzed in detail. After that a grasping experiment by soft fingers was carried out. The experiment results show that the parameters of a soft finger (positive pressure, opening distance) and the parameters of the fabric (grams per square meter, thickness, friction coefficient, stiffness) have great influence on the grasping effect. Furthermore, a grasping model was proposed. Finally, a test experiment was implemented to verify the applicability of the model proposed. This paper mainly contributed a bridge between the parameters of fabrics and the parameters of soft fingers which can help greatly to select or to design a suitable soft finger according to the properties of a fabric accurately and quickly. In addition, the grasping model of fabric pieces of garment by using robotic soft fingers was found to have a good potential applicability in the field of smart manufacture of garment in the near future.
19 July 2021 in Textile Research Journal
It is a global challenge in the textile and apparel industry to grasp and separate fabric pieces automatically using mechanical devices. This paper summarized studies on grasping a textile cutting piece by different principles and mechanical systems, and focused on bionic soft fingers made of silica gel. In the study, we first tested single-point grasping to explore the factors that influence the grasping effects of soft fingers, and found that (a) the grasping margin is a crucial factor that influences the effect of grasping, (b) the sides and the directions of a piece play important roles in grasping, and a reverse side and a vertical direction often bring better results of grasping, and (c) although the opening distance of a soft finger is significant to the result of grasping, successful grasping is a joint result of the grasping margin and the opening distance. We then experimented with the arrangement of soft fingers, and discovered that (a) the shape and the area of a cut piece are the determinants for the number of soft fingers that have to be used, (b) a soft finger is needed at the intersections of a piece to guarantee unfolded grasping and transferring, and (c) the number of soft fingers to be used for a specific grasping task can be estimated after major factors are determined. The conclusion we proposed is easy to understand and is convenient for training or application in an industrial production. In the future, it is expected to be applied to the intelligent production of clothing.
6 March 2017 in International Journal of Clothing Science and Technology
Purpose: The purpose of this paper is to focus on solving a fit problem associated with female pants by taking into account the body shape of crotch curves. The patterns of customized pants could be altered with the distance ease (DE) distribution along the crotch curve. Design/methodology/approach: Four pairs of pants with different crotch ease allowances were designed based on a standard mannequin, and used to study how the DE was distributed along the crotch curve at a given ease allowance. The unclothed mannequin and the four pants, which were dressed, respectively, on the mannequin, were scanned consecutively by a body imaging system. The crotch curve of the unclothed mannequin was superimposed on that of each clothed mannequin to exhibit the differences in radial distance so that the DE distribution could be measured. Findings: Through the regression analysis, the prediction models were established to express the relationships between the DE and the ease allowance. These models could be used to estimate the DEs along a crotch curve to reflect its asymmetrical shape when a total allowance was selected. The crotch curves on the pant patterns could be then modified by adding the predicted DEs to the scanned crotch curve. Originality/value: This study demonstrated a new pattern alteration approach to achieve a better fit for customized female pants based on the 3D scanning data. This approach can be extended to pattern alterations for men’s pants and other shape-critical products.