Continuous-time integrators are a central component in ΔΣ modulators, in analog computers, and general analog signal processing. If several integrators are interconnected, scaling plays an important role: In analog computers, scaling is performed with respect to the machine unit (MU). In ΔΣ modulators, scaling is performed in such a way that at maximum input signal the allowable dynamic range of no integrator is exceeded. In both cases the scaling is a compromise limiting the dynamic range. For analog computers, it was proposed early on to extend the dynamic range by hybrid integrators. Here, an analog range overflow is processed digitally and the analog integrator is reduced to its permissible operating range within the machine unit interval. While in earlier proposals for hybrid integrators only the subsequent integrator stage processes the overflow and works with reduced analog values, our hybrid integrator can process the overflow directly, with the analog reset process being continuous-time. In the case of highly dynamical input signals and transients, analog overload handling is further improved by a prediction of the overload that includes the currently applied input signal in the calculation. For example, with continuous-time ΔΣ modulators, overload of the analog integrator can be reliably avoided.
This paper presents a 10-bit tracking ADC using a multi-bit quantiser and a segmented current-steering DAC. The quantiser allows a dynamical adjustment of the step size dependent on the input signal waveform. This mitigates the limited slew rate of delta encoded ADCs. Energy consumption induced by 1 LSB ripple is removed by the quantiser. The segmented current-steering DAC allows simple control, good monotonicity and improved transient response when compared to previous design as well as potential power reduction.