The local crystallization during annealing at 600 °C in nanoscale diamond-like carbon coatings films grown by pulsed vacuum-arc deposition method was observed using modern techniques of high-resolution transmission electron microscopy. The crystallites formed by annealing have a face-centred cubic crystal structure and grow in the direction [ ] as a normal to the film surface. The number and size of the crystallites depend on the initial values of the intrinsic stresses before annealing, which in turn depend on the conditions of film growth. The sizes of crystallites are 10 nm for films with initial compressive stresses of 3 GPa and 17 nm for films with initial compressive stresses of 12 GPa. Areas of local crystallization arising during annealing have a structure different from the graphite. Additionally, the investigation results of the structure of nanoscale diamond-like carbon coatings films using Raman spectroscopy method are presented, which are consistent with the transmission electron microscopy research results.
Diamond-like carbon coatings on hard-alloy substrates, including coatings doped with nitrogen about 1.0 μm thick have been obtained using a pulse vacuum-arc method. Three types of coatings have been...
Results of tribotests of nanosized carbon coatings formed on silicon surfaces by the pulse vacuum-arc method at various orientations of substrates with regard to a carbon plasma flow are presented;...
1 January 2016 in Journal of Nano- and Electronic Physics
Journal of Nano- and Electronic Physics. Scientific journal. ISSN: 2077-6772. Journal abbreviation: J. Nano- Electron. Phys. No page charges. All articles are freely available on-line. Issued 4 times per year. Publisher: Sumy State University. (Sumy, Ukraine)
Nitrogen-doped carbon coatings up to 100 nm thick are obtained on single-crystal silicon wafers with the use of the pulsed vacuum-arc technique with nitrogen gas puffing into a vacuum chamber. The dependence that the specific conductivity has on the nitrogen pressure is investigated. The nitrogen content of the coating and plasmon energy are obtained by the spectroscopy of electron-energy characteristic losses (EECLs). The coating morphology is investigated with scanning probe microscopy (SPM) and transmission electron microscopy (TEM). The dependences that the specific conductivity has on nitrogen pressure and thickness show nonlinear behavior; correlations between the coating morphology, specific conductivity, and plasmon energy are revealed. An explanation for the results is proposed.