20 April 2019 in Journal of the Brazilian Society of Mechanical Sciences and Engineering
23 July 2021 in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering
The research article addresses the reciprocating wear behaviour of hybrid AA7075 reinforced with boron carbide and boron nitride through a stir-casting technique. The experiment involved varying wt.% of the secondary particle boron carbide (3, 6 and 9) while boron nitride (3) was kept as constant. The hybrid composites were characterised using scanning electron microscopy coupled with energy dispersive spectroscopy. The hardness and tensile behaviour of the hybrid composites were evaluated. Reciprocating wear behaviour of the hybrid composites were examined using a tribometer by varying the wear parameters such as load and sliding distance. The results revealed that AA7075/6boron carbide/3boron nitride had better hardness, tensile and wear properties. The surface morphology of the wear samples was analysed using SEM.
12 July 2023 in E3S Web of Conferences
The modern period has seen advancements in compiler design, optimization technique, and software system efficiency. The influence of the most recent developments in compiler design and optimization techniques on program execution speed, memory utilization, and overall software quality is highlighted in this study. The design of the compiler is advanced by the efficient code that is now structured in research with high-speed performance without manual intervention. The influence of the most recent developments in compiler design and optimization techniques on program execution speed, memory utilization, and overall software quality is highlighted in this paper's thorough analysis.
6 March 2019 in Materials Research Express
12 July 2023 in E3S Web of Conferences
Water plays a vital role in the creation of human being and other natural phenomena. More than 80% of the resources is surrounded by water but in that only 20% is good for consumption others are fully polluted and contaminated. Now a days water is more polluted, and even supplied in a very lesser level so to check and monitor the quality of the water we mainly using a number of sensors are used to monitor the water’s quality and distribute it to the less fortunate. The quality of the water is affected by several parameters. Water is provided from difference resources like lake, pond, well, ground water, oceans etc.so these waters are not good for consumption Therefore, our goal is to assess the water’s quality while keeping an eye on the flow and level of the water. It is intended to use a variety of cutting-edge devices to check various water quality system parameters.
14 October 2022 in Journal of Testing and Evaluation
The present research work exhibits the effect of reinforcement particles on the mechanical and wear properties of AA4032 hybrid and unhybrid metal matrix composites (MMCs). The unhybrid MMCs were prepared by incorporating titanium carbide (TiC) particles onto the AA4032, whereas the hybrid MMCs were prepared by the addition of hexagonal boron nitride (h-BN) particles to unhybrid AA4032-TiC composite. The tribological study conducted on the composites reveals that the wear rate was augmented at a higher applied load because of the formation of plastic deformation with some cracks. The generation of shear stress at an elevated applied load increases the coefficient of friction (COF). However, the addition of TiC and h-BN particles decreases the COF and wear rate because of the abrasion resistance and self-lubrication property of TiC and h-BN, respectively. The wear mechanism map study confirms that the hybrid MMCs have better wear resistance properties than the unhybrid MMCs with minimum delamination.