1 April 2020 in International Communications in Heat and Mass Transfer
3 February 2021 in SN Applied Sciences
In this study, the numerical investigation of the natural convection heat transfer around a hot elliptical cylinder inside a cold rhombus enclosure filled with a nanofluid in the presence of a uniform magnetic field is conducted. An immersed boundary method as a computational tool has been extended and applied to solve the problem. The influence of various parameters such as cylinder diameters (a, b), Hartmann number (Ha = 0, 50 and 100), nanofluid volume fraction ( $$\varphi = 0 , 2.5\% and 5\%$$ ), and Rayleigh number (Ra = 103, 104, 105, 106, and 107) has been studied. Streamlines and isotherms contours as well as average Nusselt number have been specified for different modes. An equation for the average Nusselt number as a function of mentioned parameters is presented in this paper. The results show that at lower Ra numbers of Ra = 103 and 104, the magnetic field effect is negligible. However, at higher Rayleigh numbers, the average Nusselt number (Nuave) decreases with the increasing Ha number. The maximum decrease in Nuave at Ra = 105, 106 and 107are calculated −8.15%, −23.4% and −27.3%, respectively. An asymmetry-unsteady flow is observed at $${\text{Ra}} = 10^{7}$$ for Ha = 0. However, at higher Ha numbers a steady-symmetrical flow is formed.
1 December 2022 in Fluid Dynamics Research
Large-scale eddies in a lid-driven cavity are potential sources of angular momentum which can induce rotational effect in a free-to-rotate inertial body due to fluid–structure interaction. The novel objective of the present study is to investigate vortex-induced autorotation of an elliptic blade hinged at the centre of a lid-driven cavity. The governing equations are numerically solved using iterative direct forcing immersed boundary method. The impact of Reynolds number and blade length on dynamics characteristics of the blade are analysed. Considering left to right motion of horizontal top lid, four different vortex-induced modes are identified as the steady blade response, including stationary position, small-amplitude fluttering, clockwise autorotation and counter-clockwise autorotation. Long blades are mostly potential for steady clockwise autorotation, particularly in higher Reynolds numbers, due to dominance of principal near-wall cavity vortex compared to other vortices. In contrast, effective role of central counter-clockwise vortex in a short blade and weak interaction of such blade with the near-wall cavity vortex leads to a steady counter-clockwise rotation, particularly in high Reynolds numbers. In the case of low Reynolds numbers or blade with moderate length, vortex-induced blade motions in clockwise and counter-clockwise directions are fairly balanced, leading to stationary position or small-amplitude fluttering modes.