We have revealed the fundamental mechanism of specific Cs+ adsorption into Prussian blue (PB) in order to develop high-performance PB-based Cs+ adsorbents in the wake of the Fukushima nuclear accident. We compared two types of PB nanoparticles with formulae of FeIII4[FeII(CN)6]3·xH2O (x = 10–15) (PB-1) and (NH4)0.70FeIII1.10[FeII(CN)6]·1.7H2O (PB-2) with respect to the Cs+ adsorption ability. The synthesised PB-1, by a common stoichiometric aqueous reaction between 4Fe3+ and 3[FeII(CN)6]4−, showed much more efficient Cs+ adsorption ability than did the commercially available PB-2. A high value of the number of waters of crystallization, x, of PB-1 was caused by a lot of defect sites (vacant sites) of [FeII(CN)6]4− moieties that were filled with coordination and crystallization water molecules. Hydrated Cs+ ions were preferably adsorbed via the hydrophilic defect sites and accompanied by proton-elimination from the coordination water. The low number of hydrophilic sites of PB-2 was responsible for its insufficient Cs+ adsorption ability.
11 May 2016 in Journal of the American Chemical Society
A new nanocomposite, Prussian blue–polyaniline:polystyrene sulfonate (PB–PANI:PSS), has been synthesized by incorporating both polyaniline (PANI) and Prussian blue (PB) electrochromic materials. The PB–PANI:PSS nanocomposite is synthesized by two-step polymerization, and the nanocomposite thin film is prepared by a wet-coating method on the conductive ITO glass. The PB–PANI:PSS thin film shows three optical states: highly transparent in a reduced state (−0.5 V vs. Ag/AgCl), green color at +0.2 V contributed by PANI, and blue-green color at +0.5 V contributed by both PANI and PB. Scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDX) mapping images show that the PB pigments were well dispersed in the PANI:PSS matrix. FTIR spectra show the specific absorbance peaks of both PANI:PSS and PB in the nanocomposite film. Cyclic voltammetry (CV) analysis reveals two redox pairs from the PB–PANI:PSS thin film. The UV-Vis absorbance spectra show a broader absorbance range for the nanocomposite than for pure PANI and PB. An averaged transmittance (Tave) was established to evaluate this wide-range absorbance material. The ΔTave value was 52.3% when applying an operation voltage between −0.5 and +0.5 V, and the switching times were 8.1 and 13.3 s for bleaching and darkening, respectively. The coloration efficiency was calculated to be 76.6 cm2 C−1 at the averaged visible wavelength. This PB–PANI:PSS composite thin film could potentially be useful for multi-color electrochromic applications because the ease of processing using water may facilitate the preparation of large-area thin films.