An organic redox flow battery adopting tris(2,2′-bipyridine)nickel(II)tetrafluoroborate (Ni(Bpy)3(BF4)2) and tris(2,2′-bipyridine)iron(II)tetrafluoroborate (Fe(BPy)3(BF4)2)) in propylenecarbonate electrolyte is investigated. With cyclic voltammetry, the redox current of one-electron related Fe(II)/Fe(III) and two-electron related Ni(II)/Ni(0) appears at 0.65 V and −1.66 V (vs. Ag/Ag+), respectively and their cycleabilities are highly stable during 100 cycles. Their charge-discharge characteristics on the carbon-felt electrodes are evaluated with 0.4 M Fe(Bpy)3(BF4)2 and 0.2 M Ni(Bpy)3(BF4)2 which are adopted as catholyte and anolyte. Comparing with the aqueous system, the higher cell voltage of 2.2 V was achieved and initial coulombic and energy efficiencies were reached with 90.4 and 81.8%.
20 December 2012 in Journal of Materials Chemistry A
Li-rich layered cathode materials are very promising candidates for next generation high energy lithium ion batteries. One of the Li-rich layered cathode materials, Li1.167Ni0.233Co0.100Mn0.467Mo0.033O2 is prepared by a co-precipitation method. In this report, we focus on anomalous changes upon cycling in Li1.167Ni0.233Co0.100Mn0.467Mo0.033O2 cathode material in a voltage range of 2.0–4.55 V at room temperature. The structural transitions upon cycling are analyzed by ex situ X-ray diffraction. In addition, the changes in local structure during cycling are studied by X-ray absorption near edge structure. With differential capacity plots by controlling the cut-off voltage, the voltage decay during cycling is intensively studied. The continuous activation process of the residual Li2MnO3 component during cycling is correlated with voltage decay during cycling, and increasing capacity during the initial several cycles. Also, the electrochemical performance in Li1.167Ni0.233Co0.100Mn0.467Mo0.033O2 cathode material below 4.4 V is discussed. Furthermore, cycle performance is improved by reassembling Li1.167Ni0.233Co0.100Mn0.467Mo0.033O2 into another cell after washing.