28 February 2026 in Revista Politécnica
Direct flame burners are extensively used in forging processes to heat metal billets. Among these, atmospheric or suction burners are the most prevalent due to their simple construction and low cost. These devices operate based on the Venturi effect, which introduces air into the mixing chamber to allow premixing with the fuel gas before combustion begins. The proper functionality of these devices depends on numerous construction parameters that determine the air-to-gas ratio in the mixture, directly affecting their performance. This study uses computational fluid dynamics (CFD) to compare two atmospheric burner designs. The first geometry corresponds to a conventional design assembled from iron pipe fittings, while the second follows more advanced design principles described in the technical literature. Simulations performed in ANSYS Fluent reveal that the shape of the suction chamber has a strong impact on the location of the low-pressure region and on the direction of airflow toward the liquefied petroleum gas (LGP). A comparison between both configurations shows that the geometry and the setting of the primary air regulator significantly affect burner efficiency by modifying the air entrainment ratio. These findings underscore the importance of geometrical design in enhancing the mixing process and the overall performance of atmospheric burners.