29 July 2026 in Bulletin of Shakarim University. Technical Sciences
This study examines the thermophysical properties of corn grain and corn cobs at various moisture content levels. The aim of the research was to determine the specific heat capacity, thermal conductivity, and thermal diffusivity for the analysis of thermal treatment and drying processes of corn. In addition, thermophysical characteristics, including the density of corn grain and cobs, were determined, and the dependence of these parameters on moisture content was established. The obtained relationships allow for a more accurate description of heat and moisture transfer processes during the drying and storage of corn. To determine the thermophysical properties of corn cobs, the ITP MG4-100 device was used, which provides measurement of the main thermophysical parameters with the required accuracy. A spherical bicalorimeter was also employed to determine the thermophysical properties of corn grain and to calculate the main thermal characteristics of the material. Measurement of temperature parameters on the surface of corn cobs was carried out using a Fluke infrared thermometer, which enabled temperature monitoring during the experiment. Drying of the samples was performed in the «ShS-40 SPU» drying unit within specified temperature and humidity ranges. During the study, the thermophysical properties of corn grain and cobs at different moisture contents were determined. Moisture transfer processes were also investigated; as a result of drying, the moisture content of the product decreased from 72% to 60%. Analysis of the experimental data and the obtained relationships contributes to the development of thermal treatment and drying methods aimed at improving the efficiency of corn drying.
29 July 2026 in Bulletin of Shakarim University. Technical Sciences
The article presents the results of an investigation of the corn drying process using an experimental drying unit based on an air-type solar collector. Thermotechnical experiments were conducted, including measurements of air flow velocity and monitoring of changes in corn moisture content during the drying process. In addition, the structural and operational characteristics of the solar heliocollector were analyzed, and solar radiation indicators in the experimental area were studied, which made it possible to assess the level of available solar energy and its influence on air heating efficiency. The study allowed the thermal power of the air collector to be determined, the temperature distribution along its length to be evaluated, and optimal operating parameters of the system to be established. It was found that the use of solar heating provides a significant reduction in energy consumption for corn drying, increases the energy efficiency of the process, and promotes the sustainable use of renewable energy sources. Furthermore, experimental results were compared with theoretical calculations, enabling refinement of heat and moisture transfer kinetics within the corn layer. The obtained results can be applied in the design and improvement of solar drying systems for agricultural products and in substantiating rational drying regimes under conditions of variable solar radiation and natural ventilation.