21 August 2023 in Bioresource Technology
13 May 2024 in Bioresource Technology
Thermochemical treatment significantly impacts the physiochemical properties of lignocellulosic biomass. Traditional characterization methods lack granularity, requiring advanced analytical techniques for comprehensive biomass characterization. This study analyzed elemental composition and distribution in untreated rice husk, rice straw, and bamboo chips at micron and sub-micron scales. Results reveal significant variations in composition and spatial distribution among agro-residues. Thermogravimetric analysis shows divergent decomposition patterns, while spectroscopic analysis indicates structural complexities and distinct silica content. Surface mapping illustrates prevalent silica and alkali metals on rice husk and rice straw. Atomic force microscopy depicts distinctive surface morphologies, with rice straw exhibiting heightened roughness due to silica bodies. Inductively coupled plasma-mass-spectrometry identifies the abundance of alkali and alkaline earth metals in rice waste. Time-of-flight secondary ion mass spectrometry elucidates elemental spatial localization, affirming heterogeneous distribution across rice waste and homogenous distribution across bamboo waste. Findings bridge the gap between biomass composition and optimized thermochemical conversion outcomes.
30 September 2026 in SSRN Electronic Journal
Agricultural residues offer a renewable source of crystalline cellulose, but its recovery is hindered by the surrounding hemicellulose-lignin matrix. Developing effective processing sequences requires balancing removal of non-cellulosic components with cellulose retention and the properties of the recovered material. This study integrates artificial neural network (ANN) modeling of rice straw torrefaction with a comparison of three downstream treatments for cellulose recovery. The ANN related torrefaction temperature, residence time, and heating rate to solid yield, condensate yield, and cellulose content in the resulting torrefied biomass. Torrefaction at 260 °C and 30 min with a heating rate of 10 °C /min was selected to prepare the feedstock (torrefied biomass) for subsequent acid hydrolysis, alkaline treatment, and deep eutectic solvent (DES) treatment. Among the conditions investigated, alkaline treatment produced the fraction with the highest reported cellulose content ~ 75 wt%, compared with ~ 67 wt% after acid treatment and 65 wt% after DES treatment. Characterization of the alkaline-derived material indicated cellulose I, a crystalline form of cellulose, with a Segal crystallinity index of 74.5% and a principal thermal degradation peak near 340 °C. By connecting torrefaction modeling with comparative downstream fractionation and product characterization, this work identifies a processing sequence for recovering crystalline cellulose from rice straw. The findings support further process development through evaluation of overall cellulose retention, chemical consumption, and energy requirements.
30 March 2026 in SSRN Electronic Journal
Biogenic cyanide (bio-CN) production via photosynthetic microorganisms represents a sustainable alternative to fossil-based cyanide (CN) synthesis by enabling direct conversion of inorganic carbon into a value-added chemical under ambient conditions. In this study, a systematic process intensification strategy was developed to enhance bio-CN production through cultivation and reactor engineering. Two cyanobacterial strains (Jaaginema sp. TAU-MAC 0110 and Cyanocohniella hyphalmyra TAU-MAC 3117) and the green-alga Chlorella vulgaris were comparatively evaluated across progressively engineered cultivation systems to assess carbon conversion efficiency and process scalability. Static batch cultivation resulted in limited productivity due to CO2 and mass-transfer constraints. Transition to aerated spinner-flask cultivation significantly improved gas-liquid mass transfer, accelerating biomass formation and CN synthesis. Jaaginema sp. TAU-MAC 0110 demonstrated superior biomass-normalized CN yields and fastest growth kinetics, and was therefore selected for scale-up and optimization in a laboratory-scale photobioreactor. Under optimized conditions (pH 8.5, 20 ºC, aeration rate 2.0 L/min, batch time: 26 days), Jaaginema sp. TAU-MAC 0110 achieved a maximum bio-CN concentration of 95 µM, corresponding to biomass-normalized bio-CN yield of 2.125 mg-CN/g-biomass and biomass-normalized bio-CN productivity of 0.082 mg-CN/g-biomass-day, representing approximately a 90-fold increase compared to previously reported cyanobacteria systems. The results demonstrate the technical feasibility of a reactor-engineered, CO2-driven bioprocess for CN production, positioning cyanobacteria as a promising carbon-to-chemical conversion platform for sustainable chemical manufacturing.