Dmytro Sivykh

Dmytro Sivykh

Auto-generated profile, based on publicly available information

Dmytro Sivykh

National Technical University “Kharkiv Polytechnic Institute

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications

2 September 2024 in Internal Combustion Engines
Verified
Journal Article
Open access
PDF file
OTO. V. Trynov
O. V. Trynov
DSD. G. Sivykh
D. G. Sivykh
ASA.M. Sergienko
A.M. Sergienko
The paper presents the results of an intermediate stage of the study of heat transfer processes in high-speed diesel engines of the automotive tractor type at transient load discharge-load-injection modes, which are characteristic of this type of diesel engines. In such modes, as evidenced by the results of calculations of the thermal stress state of combustion chamber parts, in particular pistons, exhaust valves of the gas distribution mechanism, significant tensile and compressive stresses are observed compared to operation at steady-state conditions. This is the reason for the occurrence of defects in the form of cracks on the heat exchange surfaces of these parts, which limits the service life of automotive tractor engines. For a more detailed study of transient processes, as the main approach, it is proposed to use the well-known method of heat balance tests of a high-speed diesel engine, but with the involvement of automated processing of measurement results in digital form at steady-state and transient modes. It is proposed to focus on heat consumption, which is a component of the heat balance in the lubrication and cooling system. Without the use of automated information processing directly at the time of transient load shedding and load shedding, it is impossible to obtain such information on cooling and lubrication systems. Recording of transient heat transfer processes makes it possible to track the influence of engine operating parameters, the dynamics of the transient process depending on its duration, the initial and final steady-state modes between which the transition is being studied. In general, this way, it is possible to assess the adaptability of cooling and lubrication systems to heat dissipation during sudden changes in load, to avoid, or at least limit, the growth of thermal stresses. The publication presents a possible variant of the schematic solution of such a system for automated processing of the results of heat balance tests with the maximum use of equipment that is mass-produced and has already been used previously in heat balance tests.

15 August 2025 in Internal Combustion Engines
Verified
Journal Article
Open access
PDF file
OTO. V. Trynov
O. V. Trynov
DSD. G. Sivykh
D. G. Sivykh
The publication deals with the methodology for conducting motor experiments to study the effect of diesel intake system air filter fouling on the economic and environmental performance of the engine. The methodology also makes it possible to track the influence of changes in the air excess ratio on these indicators within the operating modes of the diesel engine. In modern internal combustion engines with electronic control units, air supply processes are controlled automatically. In this case, based on the program laid down in the control unit, the consumption of both fuel and air charge is adjusted, and the engine operating modes are considered for the development of such a program, which are determined, in turn, by the type of internal combustion engine, its purpose, boost level, and operating conditions. At the same time, the main goal is to select the optimal consumption of both fuel and air, depending on the operating mode. In particular, the air consumption, the excess air ratio can be adjusted both upward in forced modes to improve the processes of mixture formation, the completeness of fuel combustion, and downward in partial modes to reduce pumping costs and increase mechanical efficiency. Thus, modeling the processes of air filter fouling, limiting the air flow through the diesel engine can be considered in a broader sense by conducting certain experimental evaluations for both forced and partial load modes. The proposed experimental methodology is characterized by simplicity and can be used in the educational process to consolidate the relevant theoretical provisions, in particular, in the course “Operation and Repair of Internal Combustion Engines”.

12 October 2026 in Internal Combustion Engines
Verified
Journal Article
Open access
OTO. V. Trynov
O. V. Trynov
DSD. G. Sivykh
D. G. Sivykh
When developing advanced designs for internal combustion engines for motor vehicles and tractors, and enhancing the competitiveness of internal combustion engines by improving their economic and environmental performance-achieved through the optimisation of operating parameters and the intensification of the operating process-reliability under operating conditions remains a key indicator of design quality. According to accepted standards and research, reliability is quantitatively assessed in terms of durability, failure-free operation, maintainability and survivability-relevant indicators that can be practically evaluated at the design stage of a future-oriented design. The increasing use of modern automotive and tractor-type internal combustion engines affects the thermal stress state (TSS) primarily of combustion chamber components, in particular the exhaust valve assembly. A prerequisite for achieving high operational reliability at the design stage is the mathematical modelling of thermal and mechanical loading processes on combustion chamber components. In this context, the thermal stress state of the components is analysed both for steady-state forced operating modes and for transient modes involving sudden load drops and surges, which are characteristic of the operating conditions of automotive and tractor engines in particular. Mathematical modelling using non-stationary mathematical models refined during experiments makes it possible to assess the potential of the proposed design solutions aimed at improving the thermal-mechanical properties of the component and its reliability. Among such solutions, the effectiveness of which was tested at the Department of Design and Technology of the National Technical University ‘Kharkiv Polytechnic Institute’ during a series of engine and non-engine tests, the application of local air cooling to the exhaust valve and exhaust valve seat within the valve train can be highlighted. This involves the automated supply of coolant. The application of local cooling requires modifications to the design of the exhaust valve. To assess the reliability of the improved design and compare it with the standard production version, it is proposed to investigate the thermal fatigue strength of the valve variants, which is the aim of this study. The paper also analyses published material relating to the assessment of thermal fatigue strength and calculation methods. The research has been carried out, and its results can be used in the teaching of the course «Operation and Reliability of Internal Combustion Engines, Combined and Hybrid Power Plants».

26 July 2021 in Internal Combustion Engines
Verified
Journal Article
Open access
PDF file
АТА.в. Триньов
А.в. Триньов
DSD.G. Sivykh
D.G. Sivykh
The results present the intermediate stage of the study of the thermal state of individual heat-stressed parts and units of a forced tractor diesel engine in the conditions of their local air cooling (LAC), which is regulated in automatic mode. Possibilities of practical implementation on the basis of microprocessor control systems of multi-circuit local cooling of parts of valve exhaust unit, bearing unit of turbocharger, if necessary, additional air cooling of the upper part of cylinder blocks in the area of cylinder liners are considered and evaluated. The listed parts, as evidenced by the results of many engine tests, differing in the values of the maximum critical temperatures, which in turn depend on the course of heat exchange processes in the corresponding interfaces, nodes. At the same time, in the conditions of operation with the use of the LAC system on the diesel engine there are additional problems associated with the complication of the cooling control algorithm, the need to move to multi-circuit options with their critical temperature values and required cooling air costs. At this stage of the study, a test was performed in the test mode of the algorithm for supply control and shutdown of the coolant supply, the corresponding circuit solutions for its implementation. In the engineless experiment, previously specially designed and thermocoupled units were used, which were heated separately with the set test temperatures, as well as a series-produced unit, which is part of the 4th generation gas cylinder equipment (GCE) of modern engines. The unit consists of four sections with solenoid valves, which dose the gas supply to the injectors according to a given algorithm (Valtek type 30). At the input of the engineless experiment, this unit was used to turn on and off the supply of compressed cooling air in separate circuits (from 2 to 4). The moments of operation of the valves (opening-closing) corresponded to the set test temperatures. In addition to the dynamics of temperature changes at the control points of the research units during the cooling process, the pressure, temperature, and coolant flow rates on individual circuits were also monitored. The conducted engineless experiment confirmed the correctness of the adopted circuit solutions, and also proves the possibility of further application of serial GCE units in LAC systems.

7 September 2022 in Internal Combustion Engines
Verified
Journal Article
Open access
PDF file
ATA.V. Trynov
A.V. Trynov
DSD.G. Sivykh
D.G. Sivykh
Для підвищення надійності малорозмірних турбокомпресорів, зокрема підшипникового вузла, запропоновано використання в автоматичному режимі локального охолодження підшипника стисненим повітрям. Розглядається конструкція турбокомпресора з центральним корпусом, в якому розміщується підшипник і до якого підводиться під надлишковим тиском моторне масло з системи змащення двигуна. Така конструкція є найбільш розповсюдженою серед турбокомпресорів автотракторних двигунів. Критичним для підшипника можуть стати форсовані режими двигуна, що супроводжуються закиданнями температури відпрацьованих газів, наприклад, внаслідок некерованого збільшення циклової подачі, різкого зростання навантаження. Такі режими призводять до зростання температурних деформацій турбінного колеса, ротора, знижують надійність турбокомпресора. Відведення теплоти від ротора через підшипниковий вузол в систему змащення виявляється недостатнім, необхідне додаткове короткочасне локальне охолодження. В проведеному дослідженні змодельовані теплообмінні процеси в підшипниковому вузлі малорозмірного турбокомпресора з використанням розробленої математичної моделі на основі методу скінчених елементів. Для уточнення моделі, а саме граничних умов задачі теплопровідності, було проведено серію безмоторних експериментів з локально охолоджуваним підшипником. В ході безмоторних експериментів було відпрацьовано алгоритм роботи системи автоматичного керування, відібрані та перевірені на практиці окремі її структурні елементи. Проведені безмоторні експерименти та результати математичного моделювання підтвердили ефективність використання системи автоматичного локального охолодження підшипникового вузла. Зазначені заходи підвищують надійність малорозмірних турбокомпресорів.