We present a dual passivation approach for p–i–n perovskite solar cells using phenethylammonium chloride that simultaneously passivates defects at the grain boundaries and the perovskite/C 60 interface, thus substantially enhancing both VOC and FF.
Mitigating the migration of mobile ions within perovskite solar cells is a crucial step on the way to improving their stability. In the past, transient capacitance measurements were applied to extract information about mobile ions, including their activation energy, diffusion coefficient, density, and polarity. However, in this work, we show that the interpretation of capacitance transients is more complex than originally proposed because of the intrinsic nature of the perovskite and the contributions of charge transport layers to the capacitance. Using drift-diffusion simulations and light-intensity-dependent capacitance transient measurements, we show that the direction of capacitance transients is not linked to the polarity of the migrating species. Instead, the direction of the transients is linked to the layer of the cell that dominates capacitance modulation. This work illustrates that transport layers can be crucial for the capacitance and impedance response of perovskite solar cells, and therefore, for characterizing mobile ions in perovskites.
The migration of mobile ions is one of the leading causes of the degradation of perovskite solar cells. However, quantifying mobile ions in complete perovskite solar cells is challenging due to the complex device stacks and the impact of charge transport layers on the measurement techniques. Here we develop a simple and openly accessible that approximates drift-diffusion simulations. The step model is based on the expression of the charge density in the ionic and electronic accumulation and depletion layers as step functions. We can then accurately determine the impact of mobile ions on the dc potential distribution of perovskite solar cells. Furthermore, we can simulate electrical measurement techniques commonly used to quantify mobile ions: capacitance transient, current transient, and capacitance-frequency measurements. By validating the step model with drift-diffusion simulations, we show that an accurate extraction of ion density, diffusion coefficient, and activation energy is possible in an accessible range. We finally apply the step model developed to estimate the ionic conductivity and activation energy of perovskite solar cells.