14 May 2018 in Journal of Materials Chemistry C
Catalytic decomposition of H 2 S by SnS 2 , with generation of H 2 , plays a critical role in the SnCl 4 /H 2 S CVD process.
15 November 2016 in The Journal of Chemical Physics
Two-dimensional (2D) semiconducting transition metal dichalcogenides (TMDs) are of great interest for applications in nano-electronic devices. Their incorporation requires the deposition of nm-thin and continuous high-k dielectric layers on the 2D TMDs. Atomic layer deposition (ALD) of high-k dielectric layers is well established on Si surfaces: the importance of a high nucleation density for rapid layer closure is well known and the nucleation mechanisms have been thoroughly investigated. In contrast, the nucleation of ALD on 2D TMD surfaces is less well understood and a quantitative analysis of the deposition process is lacking. Therefore, in this work, we investigate the growth of Al2O3 (using Al(CH3)3/H2O ALD) on MoS2 whereby we attempt to provide a complete insight into the use of several complementary characterization techniques, including X-ray photo-electron spectroscopy, elastic recoil detection analysis, scanning electron microscopy, and time-of-flight secondary ion mass spectrometry. To reveal the inherent reactivity of MoS2, we exclude the impact of surface contamination from a transfer process by direct Al2O3 deposition on synthetic MoS2 layers obtained by a high temperature sulfurization process. It is shown that Al2O3 ALD on the MoS2 surface is strongly inhibited at temperatures between 125°C and 300°C, with no growth occurring on MoS2 crystal basal planes and selective nucleation only at line defects or grain boundaries at MoS2 top surface. During further deposition, the as-formed Al2O3 nano-ribbons grow in both vertical and lateral directions. Eventually, a continuous Al2O3 film is obtained by lateral growth over the MoS2 crystal basal plane, with the point of layer closure determined by the grain size at the MoS2 top surface and the lateral growth rate. The created Al2O3/MoS2 interface consists mainly of van der Waals interactions. The nucleation is improved by contributions of reversible adsorption on the MoS2 basal planes by using low deposition temperature in combination with short purge times. While this results in a more two-dimensional growth, additional H and C impurities are incorporated in the Al2O3 layers. To conclude, our growth study reveals that the inherent reactivity of the MoS2 basal plane for ALD is extremely low, and this confirms the need for functionalization methods of the TMD surface to enable ALD nucleation.
28 July 2017 in Chemistry of Materials
10 April 2018 in 2D Materials
Tin disulfide (SnS 2 ) is a n-type semiconductor with a hexagonally layered crystal structure and has promising applications in nanoelectronics, optoelectronics and sensors. Such applications require the deposition of SnS 2 with controlled crystallinity and thickness control at monolayer level on large area substrate. Here, we investigate the nucleation and growth mechanism of two-dimensional (2D) SnS 2 by chemical vapor deposition (CVD) using SnCl 4 and H 2 S as precursors. We find that the growth mechanism of 2D SnS 2 is different from the classical layer-by-layer growth mode, by which monolayer-thin 2D transition metal dichalcogenides can be formed. In the initial nucleation stage, isolated 2D SnS 2 domains of several monolayers high are formed. Next, 2D SnS 2 crystals grow laterally while keeping a nearly constant height until layer closure is achieved, due to the higher reactivity of SnS 2 crystal edges than basal planes. We infer that the thickness of the 2D SnS 2 crystals is determined by the height of initial SnS 2 islands. After layer closure, SnS 2 grows on grain boundaries and results in 3D growth mode, accompanied by spiral growth. Our findings suggest an approach to prepare 2D SnS 2 with a controlled thickness of several monolayers and add more knowledge on the nucleation and growth mechanism of 2D materials.
24 April 2012 in CrystEngComm
In this paper, GaN films were grown on a novel designed template via hydride vapour phase epitaxy (HVPE). The template was fabricated by bonding a thinned MOCVD-GaN/sapphire template to a Si wafer (BTMG). Both the lattice deformation and thermal mismatch stress in the film can be decreased. The GaN film grown on the BTMG template displayed a smaller full width at half maximum (FWHM) for the (002) and (102) reflections than the film grown on the MOCVD-GaN/sapphire template (MG), characterized by high-resolution X-ray diffraction (HRXRD). The Raman measurements showed that the residual stress of the HVPE GaN film grown on the BTMG template was greatly released. The better optical quality of the GaN film grown on the BTMG template was detected in comparison to the film grown on the MG template by photoluminescence (PL) spectra. These results indicated that high quality GaN films can be obtained by using the new template.
28 September 2017 in Journal of Microscopy