23 May 2022 in Kompleksnoe Ispolzovanie Mineralnogo Syra = Complex Use of Mineral Resources
AIAbishev Chemical-Metallurgical Institutes
Abishev Chemical-Metallurgical Institutes
LELLP “Research and engineering center ERG”
LLP “Research and engineering center ERG”
+2
In the electrometallurgy of manganese alloys, viscosity has an important effect on the production indicators from the physicochemical properties of slag. During the smelting of manganese alloys, the main amount of heat spent on reduction reactions is released due to the current passing through the liquid slag phase, since the resistance of the latter, depending on the composition, affects the completeness of the reduction of manganese from melts. In the case of refined ferromanganese by the silicothermic method, the vast majority of silicon of silicomanganese is refined with higher manganese oxides or it is burned out due to oxygen in the air. The paper presents the results of thermophysical properties of slags representing the FeO - MnO - CaO - Al2O3 - SiO2 system. Laboratory experiments were carried out on synthetic slags by varying the slag basicity CaO / SiО2 = 1.5 - 1.9 and the concentration of Al2O3 = 5 - 15%. As a result, graphs of the dependence of these properties on temperature values are constructed, the activation energies of the viscous flow are calculated and the phase compositions of the experimental slags are determined using a mathematical model of the diagram of the FeO - MnO - CaO - Al2O3 - SiO2 system. Thus, an increase in the concentration of aluminum oxide against its usual level, changing the basicity of the slag, significantly affected the physicochemical properties of the slag and thereby contributes to the adjustment of the parameters of the electric melting process. At the same time, it is advisable to study the interaction of some Physical chemical properties of slags on the melting conditions of manganese ferroalloys in relation to the composition of slags.
30 June 2025 in Научный журнал "Вестник Актюбинского регионального университета имени К. Жубанова"
Жоғары сапалы минералдық ресурстардың сарқылу жағдайында нашар және байыту қиын кендерді өңдеудің тиімді технологияларын жасау ерекше өзектілікке ие болуда. Бұл жұмыста Шалқия кен орнының полиметалл кенінен ферросилицийді аз күлді тотықсыздандырғыштарды (арнайы кокс және аз күлді көмір) қолдану арқылы карботермиялық тотықсыздандыру арқылы алу мүмкіндігі қарастырылған. Зерттеу тепе-теңдік құрамы модуліндегі HSC Chemistry (Outokumpu) бағдарламалық пакетіне негізделген термодинамикалық модельдеу әдістерін қолдану арқылы жүргізілді. Fe-Si-Zn-C-O жүйесіндегі тепе-теңдік фазалық қатынастары кең температура диапазонында (500-2100°С) есептеліп, металдық және газ фазалары арасындағы элементтердің таралуына талдау жүргізілді. Кремнийдің ферроқорытпаға ең жоғары экстракциясы (90%-ға дейін) 1700-1900°С температурада, негізінен темір силициді (FeSi) және бос кремний түрінде қол жеткізілетіні анықталды. Бұл ретте мырыштың газ фазасына тиімді кетуі 1600°С жоғары температурада қамтамасыз етіледі. Алынған нәтижелер алдын ала флотациялық байытуды қажет етпей, құрамында кремний тотығы мен ұшпа компоненттері бар кендерді терең өңдеуге арналған пирометаллургиялық тәсілдің әлеуетін растайды. Ұсынылған деректер Шалқия кен орнының рудаларынан құрамында кремнийі бар әртүрлі қорытпаларды алу бойынша тәжірибелік сынақтар жүргізуге негіз бола алады.