Natural fibre-reinforced polymer composites are increasingly replacing commercial composite materials. The limitations of conventional composites materials are overcome by green composites, which are easily available, more eco-friendly and less toxic. In the current scenario, green composites are emerging in the field of material science that involves improving their physical, mechanical and thermal properties. The poor interfacial adhesion and surface incompatibility between natural fibre and biodegradable polymers lead to reduced physico-mechanical properties. In order to overcome this issue, physical and chemical modification methodologies of the natural fibre and polymer matrix are employed, among which the addition of coupling agents has a critical contribution. This paper compiles several recent research works in the utilization of coupling agents such as silane, maleic anhydride, isocyanate, triazine, etc., with the various combinations of natural fibres and polymers. In addition to this, the extents of influence of coupling agents on the characteristics of the natural fibre reinforced composite materials are also reported. This gives an overview for the future researchers to identify the gap in the field of green composite materials and novel coupling agents for different natural fibre/polymer matrix combination.
Thermochemical conversion is an effective process in production of biocrude. It mainly includes techniques such as torrefaction, liquefaction, gasification and pyrolysis in which Hydrothermal Liquefaction (HTL) has the potential to produce significant energy resource. Algae, one of the third-generation feedstocks is placed in the top order for production of bio-oil compared to the first and second-generation feedstock, as the algae can get multiplied in shorter time with the uptake of greenhouse gases. In HTL, the subcritical water helps the biomass to undergo thermal depolymerisation and produce various chemicals such as nitrogenates, alkanes, phenolics, esters, etc. The produced “biocrude” or “bio-oil” may be further upgraded into value-added chemicals and fuels. In addition, the bio-gas and bio-char are also synthesized as by-products. This review provides an overview of different routes available for thermochemical conversion of biomass. It also provides an insight on the operating parameters such as temperature, pressure, dosage of catalyst and solvent for lignocellulosic and algal biomass under HTL environment. In extent, the article covers the conversion mechanism for these two feedstocks and also the effects of the operating parameters on the yield of biocrude are studied in detail.
The rising demand for cleaner energy among the nations has turned the focus from fossil fuel-based energy sources to renewables like biomass, solar, wind, etc. Biomass conversion to fuel has increased research in recent times due to its ease and availability throughout the year. Hydrothermal liquefaction is the process where biomass converts to a liquid product via complex reaction mechanisms. This review aims to summarize the hydrothermal liquefaction of algal biomass and the improvements in the bio-crude yield using heterogeneous and homogenous catalysts. Many references have been reviewed to provide the sources for the process and have been critically well structured. This review also provided information regarding the reaction pathway for algal biomass and the effects of process parameters like temperature, residence time, pH, etc. The focus of the review is on the effects of various catalysts based on their dosage whose results collected from various sources have been tabulated. The review briefly discusses the applications of products formed during hydrothermal liquefaction after post-processing.